Re: ubxtool

[Gary E. Miller]

Yo address@hidden!

On Mon, 6 Apr 2020 10:32:39 -0400
<address@hidden> wrote:

> I am working on putting an analyzer on the GPS dev board. But ran
> into a problem that the breakout pin that is suppose to be showing RX
> data into the board is not showing any data.

You just need one jumper to loop the serial out back in to another
serial port.

Or, just use socat to monitor the stream.

>  Even though RTKlib's
> strsrv is sending data to the GPS and the GPS is blinking it's RTK
> LED.  Currently the dev board is based on USB, where it breaks out
> the serial traffic from the USB. 

You realize that the default config for USB and serial is different
on u-blox chips?  Have you checked the config?

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin

pgpcj1BOOc1cW.pgp
Description: OpenPGP digital signature