gpsd-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ubxtool


From: Gary E. Miller
Subject: Re: ubxtool
Date: Sat, 4 Apr 2020 11:46:31 -0700

Yo address@hidden!

On Sat, 4 Apr 2020 11:56:52 -0400
<address@hidden> wrote:

> Here are two more runs using gpspipe.

How?  What gpspipe options???

> Gpsd_ntrip.dat was run with this gpd command line:
>            gpsd -n /dev/ttyACM0
> ntrip://rhowittRpi:address@hidden:8082/NYPF  -N -D 7
> 
> Gpsd_ntrip1.dat was run with this gpsd command line: 
>           gpsd -n /dev/ttyACM0
> ntrip://rhowittRpi:address@hidden:8082/NYPF  -N

No point running gpsd with different debug levels if you don't send the
debug output.

> And here are a few lines of output from the -D 7  showing that RTCM
> data was being received.

> gpsd:PROG: RTCM3: unknown type 1075, length 376
> gpsd:DATA: packet type 18 from ntrip://rhowittRpi:Walfer2019 with

gpsd got an RTCM3 type 1075 packet.

> gpsd:IO: SER: => GPS:
> d301784330208917d342002099c0a43100000000202101007ff7fe7e7ff2a2229a6a421aa2a2
> 423a87ffffffffff92d2d22eb2c06b36ff25d8afb438127808fee7fa81f5181c3fb3fef00f6f
> c401120d811b4636d4720f586e997d38fb018d2e191032e71eae3d4c8118fe7846efffe037c2
> b738ce63925e249ec949141317302b1b8206feee029c03478e0eb61dcc3cc044b07e30fec0b9
> 5082bc8e0af1d02c13ff614afd68fdf5a407d9b3a0d6010353040d4c3792d55e451df91479e5
> 7e3fc3eb5f1485fc5211f19c0fa2407e823704c5ce1293e04a4f21402482e55c0babffc3811f
> 14697c51a9f1377841882109328424cc10e1702221e0770101dbf7ffffffffffffffffffffff
> fe1ffffffffffffe00000000050ec9663765ad53d55d17658db86b85f4cd5e34c97e186985b8
> e95d759121223e44b486006600cc019802f9845408a6114c4a7894e129c1e879ccf397e733cd
> 4fa90f522ffc5ff9fff07eed17bc2f976a1ed44da85b4d4242048109021417b79f6f7edee069
> 2383
> gpsd:IO: <= DGPS: 382 bytes of RTCM relayed.

And sent it to the GPS.  That is what is supposed to happen.

Ignoring gpsd_ntrip.data as you did not send the matching output.

Looking at gpsd_ntrip1.dat, looks like the same data types as before.

    1006
    1008
    1013
    1033
    1075
    1085
    1095
    1230

Have you compared the receiver internal config between the gpsd run and
the str2svr run?  Did one of those change something in the receiver?

See below for my previous questions, still unanswered:

> > Strsvr has the ability to take an ntrip input stream  and then send 
> > that to both the GPS and file.  
> 
> Binary identical?

Yes, or no?

> Now we need to figure out why the similar data passed through gpsd is
> not working.  Can you get a capture of what gpsd is sedning to a
> receiver?

Can you get that?

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin

Attachment: pgpWAuwohIs_L.pgp
Description: OpenPGP digital signature


reply via email to

[Prev in Thread] Current Thread [Next in Thread]