protux-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Protux-devel] protux 0.18.0rc1 / libmustux 0.18.0rc1 are out


From: Luciano Giordana
Subject: Re: [Protux-devel] protux 0.18.0rc1 / libmustux 0.18.0rc1 are out
Date: Mon, 23 Jun 2003 23:18:05 -0400
User-agent: KMail/1.5

I just notice that using the old ~/.protuxrc might cause some problems. Please 
remove so it is regerated

Anyway, that might not solve the crashes. I am getting them to, but only 
sometimes. I am still debugging it

[]s

On Monday 23 June 2003 05:30 pm, booker wrote:
> Am Montag, 23. Juni 2003 21:54 schrieb Luciano Giordana:
> > This is RC 1 of protux, reaching the step 2/3 of 0.20 series.
> >
> > I will hold some days on 0.18rcnnn  until it is stable enought to go
> > 0.19. Please testers, make an effort to test it, MAINLY the
> > play/rec/render routines.
> >
> > Thanks a lot
>
> Hi,
>
> first I don't have the rec peak meters when armimg a track for recording...
> are they disables right now?
> Ooops, sorry forget the lines above, because I just found it at the new
> position ... ;-) btw - is this a temporary position?
>
> And after rec protux crashed ... but just sometimes and without a warning,
> and sometimes just some seconds unpredictably after recording ... but I
> can't reproduce it right now.
>
> But below is the message:
>
> ...
> ...
>     LEAVING BusMonitor.cc::clear
> LEAVING Song.cc::toggle_play
> protux: pcm.c:929: snd_pcm_prepare: Assertion `pcm->setup' failed.
> Aborted
> address@hidden protux]$
>
>
>
> And sometimes segfaults:
>
> .....
> ......
>         [ Processing Action 38 ( TOGGLE TRACK RECORDABLE )  ]
>         ENTERING Track.cc::arm
>             ENTERING Mixer.cc::arm
>                 ENTERING MustuxAudioDeviceMapper.cc::open_bus_in
>                     ENTERING MustuxAudioBus.cc::open
>                         [ opening MustuxAudioDeviceMapper::CAPTURE bus :
> EMU10K1 - 3rd IN (hw:0,0) ... ]
>                         [ Deteceted min/max period size : 384 - 8192 ]
>                         [ Trying OPEN MustuxAudioDeviceMapper::CAPTURE BUS
> : fps=10  fragmentSize=17640  periods=2  periodSize=4410 ]
>                         [ Could not set periodSize to 4410 . ALSA let me
> use only : 4096 . Continuing anyway... ]
>                         [ *** MustuxAudioDeviceMapper::CAPTURE BUS EMU10K1
> - 3rd IN (hw:0,0) OPEN : 44100 Hz, STEREO, 16 bits periodSize=4096 *** ]
> LEAVING MustuxAudioBus.cc::open
>                 LEAVING MustuxAudioDeviceMapper.cc::open_bus_in
>                 [ CAPTURE  THREAD START : SUCESS ]
>                 ENTERING BusMonitor.cc::clear
>                 LEAVING BusMonitor.cc::clear
>                 ENTERING BusMonitor.cc::activate
>                     ENTERING BusMonitor.cc::clear
>                     LEAVING BusMonitor.cc::clear
>                 LEAVING BusMonitor.cc::activate
>             LEAVING Mixer.cc::arm
>             ENTERING Track.cc::start_recording_clip
>                 ENTERING Audio (CONSTRUCTOR)
>                 LEAVING Audio (CONSTRUCTOR)
>                 ENTERING Audio.cc::create
>                     [ Creating audio 2 channels, 44100 Hz, 16 bits ]
>                     ENTERING PrafFile (CONSTRUCTOR)
>                     LEAVING PrafFile (CONSTRUCTOR)
>                     ENTERING MustuxAudioFileFormats.cc::create
>                     LEAVING MustuxAudioFileFormats.cc::create
>                     ENTERING MustuxAudioFileFormats.cc::write_header
>                     LEAVING MustuxAudioFileFormats.cc::write_header
>                 LEAVING Audio.cc::create
>             LEAVING Track.cc::start_recording_clip
>         LEAVING Track.cc::arm
> Listener Thread starting ...
>         [ Processing Action 37 ( GO )  ]
>         ENTERING Song.cc::toggle_play
>             ENTERING Mixer.cc::go
>                 ENTERING MustuxAudioDeviceMapper.cc::open_bus_out
>                     ENTERING MustuxAudioBus.cc::open
>                         [ opening PLAYBACK bus : EMU10K1 - 2nd OUT (hw:0,0)
> ... ]
>                         [ Deteceted min/max period size : 32 - 8192 ]
>                         [ Trying OPEN PLAYBACK BUS : fps=10
> fragmentSize=17640  periods=2  periodSize=4410 ]
>                         [ *** PLAYBACK BUS EMU10K1 - 2nd OUT (hw:0,0) OPEN
> : 44100 Hz, STEREO, 16 bits periodSize=4410 *** ]
>                     LEAVING MustuxAudioBus.cc::open
>                 LEAVING MustuxAudioDeviceMapper.cc::open_bus_out
>                 ENTERING MustuxAudioDeviceMapper.cc::open_bus_out
>                     ENTERING MustuxAudioBus.cc::open
>                         [ opening PLAYBACK bus : EMU10K1 - 2nd OUT (hw:0,0)
> ... ]
>                     LEAVING MustuxAudioBus.cc::open
>                 LEAVING MustuxAudioDeviceMapper.cc::open_bus_out
> Go Thread starting ...
>                 [ PLAYBACK  THREAD START : SUCESS ]
>             LEAVING Mixer.cc::go
>             [ GOING FROM 0 ... ]
>             ENTERING BusMonitor.cc::activate
>             LEAVING BusMonitor.cc::activate
>         LEAVING Song.cc::toggle_play
> Segmentation fault
> address@hidden protux]$
>
>
> greetings
> Reinhard
>
>
> _______________________________________________
> Protux-devel mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/protux-devel

-- 
Best Regards
--
Luciano Giordana - Musician - Certified Java/GNU C++ Developer - Free Software 
Evangelist
Project Mustux - http://www.freesoftware.fsf.org/mustux
-- GNU/Linux adoption grew 65% only this yer. Smile : we're winning. --




reply via email to

[Prev in Thread] Current Thread [Next in Thread]