protux-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Protux-devel] protux 0.18.0rc1 / libmustux 0.18.0rc1 are out


From: booker
Subject: Re: [Protux-devel] protux 0.18.0rc1 / libmustux 0.18.0rc1 are out
Date: Mon, 23 Jun 2003 23:30:39 +0200
User-agent: KMail/1.5

Am Montag, 23. Juni 2003 21:54 schrieb Luciano Giordana:
> This is RC 1 of protux, reaching the step 2/3 of 0.20 series.
>
> I will hold some days on 0.18rcnnn  until it is stable enought to go 0.19.
> Please testers, make an effort to test it, MAINLY the play/rec/render
> routines.
>
> Thanks a lot


Hi,

first I don't have the rec peak meters when armimg a track for recording... 
are they disables right now?
Ooops, sorry forget the lines above, because I just found it at the new 
position ... ;-) btw - is this a temporary position?

And after rec protux crashed ... but just sometimes and without a warning, and 
sometimes just some seconds unpredictably after recording ... but I can't 
reproduce it right now.

But below is the message:

...
...
    LEAVING BusMonitor.cc::clear
LEAVING Song.cc::toggle_play
protux: pcm.c:929: snd_pcm_prepare: Assertion `pcm->setup' failed.
Aborted
address@hidden protux]$



And sometimes segfaults:

.....
......
        [ Processing Action 38 ( TOGGLE TRACK RECORDABLE )  ]
        ENTERING Track.cc::arm
            ENTERING Mixer.cc::arm
                ENTERING MustuxAudioDeviceMapper.cc::open_bus_in
                    ENTERING MustuxAudioBus.cc::open
                        [ opening MustuxAudioDeviceMapper::CAPTURE bus : 
EMU10K1 - 3rd IN (hw:0,0) ... ]
                        [ Deteceted min/max period size : 384 - 8192 ]
                        [ Trying OPEN MustuxAudioDeviceMapper::CAPTURE BUS : 
fps=10  fragmentSize=17640  periods=2  periodSize=4410 ]
                        [ Could not set periodSize to 4410 . ALSA let me use 
only : 4096 . Continuing anyway... ]
                        [ *** MustuxAudioDeviceMapper::CAPTURE BUS EMU10K1 - 
3rd IN (hw:0,0) OPEN : 44100 Hz, STEREO, 16 bits periodSize=4096 *** ]
                    LEAVING MustuxAudioBus.cc::open
                LEAVING MustuxAudioDeviceMapper.cc::open_bus_in
                [ CAPTURE  THREAD START : SUCESS ]
                ENTERING BusMonitor.cc::clear
                LEAVING BusMonitor.cc::clear
                ENTERING BusMonitor.cc::activate
                    ENTERING BusMonitor.cc::clear
                    LEAVING BusMonitor.cc::clear
                LEAVING BusMonitor.cc::activate
            LEAVING Mixer.cc::arm
            ENTERING Track.cc::start_recording_clip
                ENTERING Audio (CONSTRUCTOR)
                LEAVING Audio (CONSTRUCTOR)
                ENTERING Audio.cc::create
                    [ Creating audio 2 channels, 44100 Hz, 16 bits ]
                    ENTERING PrafFile (CONSTRUCTOR)
                    LEAVING PrafFile (CONSTRUCTOR)
                    ENTERING MustuxAudioFileFormats.cc::create
                    LEAVING MustuxAudioFileFormats.cc::create
                    ENTERING MustuxAudioFileFormats.cc::write_header
                    LEAVING MustuxAudioFileFormats.cc::write_header
                LEAVING Audio.cc::create
            LEAVING Track.cc::start_recording_clip
        LEAVING Track.cc::arm
Listener Thread starting ...
        [ Processing Action 37 ( GO )  ]
        ENTERING Song.cc::toggle_play
            ENTERING Mixer.cc::go
                ENTERING MustuxAudioDeviceMapper.cc::open_bus_out
                    ENTERING MustuxAudioBus.cc::open
                        [ opening PLAYBACK bus : EMU10K1 - 2nd OUT (hw:0,0) 
... ]
                        [ Deteceted min/max period size : 32 - 8192 ]
                        [ Trying OPEN PLAYBACK BUS : fps=10  
fragmentSize=17640  periods=2  periodSize=4410 ]
                        [ *** PLAYBACK BUS EMU10K1 - 2nd OUT (hw:0,0) OPEN : 
44100 Hz, STEREO, 16 bits periodSize=4410 *** ]
                    LEAVING MustuxAudioBus.cc::open
                LEAVING MustuxAudioDeviceMapper.cc::open_bus_out
                ENTERING MustuxAudioDeviceMapper.cc::open_bus_out
                    ENTERING MustuxAudioBus.cc::open
                        [ opening PLAYBACK bus : EMU10K1 - 2nd OUT (hw:0,0) 
... ]
                    LEAVING MustuxAudioBus.cc::open
                LEAVING MustuxAudioDeviceMapper.cc::open_bus_out
Go Thread starting ...
                [ PLAYBACK  THREAD START : SUCESS ]
            LEAVING Mixer.cc::go
            [ GOING FROM 0 ... ]
            ENTERING BusMonitor.cc::activate
            LEAVING BusMonitor.cc::activate
        LEAVING Song.cc::toggle_play
Segmentation fault
address@hidden protux]$


greetings
Reinhard




reply via email to

[Prev in Thread] Current Thread [Next in Thread]