[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Ublox and GPSD 3.22

From: Jeff Curtis
Subject: Ublox and GPSD 3.22
Date: Thu, 30 Jun 2022 06:26:59 -0400



I am using GPSD on both buster and bullseye on raspberry pi 4 boards.  I am using the standard version that’s included in the distribution.  On buster the package is 3.17 and on Bullseye its 3.22.  I have some cheap UBLOX 6 serial gps clones from amazon (gt-u7) which work ok on Buster.


Under Bullseye, once the device is configured in ublox mode, the Latitude, Longitude, and Altitude are not updated in the JSON messages, but the ECEF values are.  Using gpsmon I can see the lat/long/alt update but cgps and xgps do not show those values updated.  The only way I can get the JSON to show the updates is to use -p switch when starting GPSD. I am still trying to build the latest, to see if that will fix the problem I am having, but I am running into some other issues.


Has anyone seen anything similar? Why would gpsmon see the information update but not cgps/xgps?





Sent from my iPhone

reply via email to

[Prev in Thread] Current Thread [Next in Thread]