Re: [Protux-devel] Protux (CVS) working again,

[Reinhard Amersberger]

hi,

I made further test to figure out if the problem is caused by this alsa version 
used by mandrake 10, so I installed the stable version 0.20.1 and playing back 
(hw) works fine !!

so the final conclusion is that this actual version of MADM, or another change 
in the code, seems to cause a problem when detecting the busses ... please 
correct me if I'm wrong!

greetings
reinhard



address@hidden schrieb am 26.05.04 12:43:05:
> 
> address@hidden schrieb am 26.05.04 11:51:15:
> > 
> > > btw - play back is possible when using other alsa audio applications.
> > > so it seems to be a MADM related problem ?!?
> > 
> > Don't get it. MADM is supposed to continue even if another program is using 
> > the audio card. In case there's no programming which has claimed the 
> > audiocard MADM will detect all buses and you can use them, if the card is 
> > in 
> > use, MADM will print a warning on console, and continues starting without 
> > support for the audio card bus which is in use.
> > In other words, it should have nothing to do with the plughw problem etc. 
> > :-)
> 
> 
> ok, but it seems that there is no alsa related problem on my machine since 
> other apps can use the available busses, right?
> 
> btw - do you need more infos?
> 
> greetings
> reinhard
> 
> 
> 
> > Best wishes,
> > 
> > Remon
> > 
> > >
> > > greetings
> > > reinhard
> > >
> > > address@hidden, address@hidden schrieb am 25.05.04 00:27:29:
> > > > Am Monday 24 May 2004 19:29 schrieb Remon Sijrier:
> > > > > > hw detects just a few sample rates whereby plughw detects ALL to be
> > > > > > usable for protux, which cannot be possible as far as I understand
> > > > > > ...
> > > > >
> > > > > plughw is a software layer which converts any used sample rate /
> > > > > bitdepth to a sample rate / bitdepth the audio card can handle, so 
> > > > > yes,
> > > > > even if you want to record/play in 64 bit, 192 kHz it is supported, 
> > > > > but
> > > > > the actual values are bound by what your audiocard supports.
> > > > >
> > > > > > also no MTA is created when using plughw.
> > > > >
> > > > > Sounds strange, maybe I can get a clue when you send the output.
> > > > >
> > > > >
> > > > > Success,
> > > > >
> > > > > Remon
> > > >
> > > > ok, so please examine the attached files and good luck!
> > > >
> > > > greetings
> > > > reinhard
> > > >
> > > > <hr>
> > > > _______________________________________________
> > > > Protux-devel mailing list
> > > > address@hidden
> > > > http://mail.nongnu.org/mailman/listinfo/protux-devel