Re: WG: [Swarm-Support] Compiling swarm-2.1.148.20040122

[Paul Johnson]

Glad Swarm works!

Concerning Village: That's always been my favorite Swarm model.

I don't think you should rely on that copy of Village6 that I have in 
the OtherPeoplesCode directory.  Its my mistake that it is even up there 
anymore.  I was offering some help to *Tim Kohler  *(at Washingon State) 
*and parts of that research team *and gave them back that code along 
with the snapshots that are in that directory.  The program accesses 
data that lives in big files that were kept separately.  Last year, I 
was really excited about that code and was making some pretty deep 
changes in the structure of that model to make it work more to my 
liking, but I do not know what path the project has followed since 
then.  But I bet they have something excellent to show you.

I forgot to remove it from my web page. I am taking it down now.  I just 
put it there originally so the members of the team could see my cool  
pictures.

I believe that the Village model in the Swarm ftp does work well. I 
think that's version 4 or so.

If you want the Village code, I'd urge you to contact the authors.  They 
have been very helpful to me over the years.
I'm cc'ing this to Tim, hopefully he can put you in touch with somebody 
who can fill you in on the current version of the model.

pj

Giovanni Maniscalco Basile wrote:

> Dear Pj,
>
> thanks, everything worked OK.
>
> I also donwloaded from your Swarm site the gzipped Village6 code.
> It compiled all right, but at runtime it complained that it didn't 
> find some data files: hydro.data
> degrade.data, etc. I got some of them from an earlier version of the 
> simulation, but no all the needed files.
> Do you know where I can find them?
>
> Thank you again.
>
> Giovanni Maniscalco Basile
>
> Il sab, 2004-03-27 alle 17:14, Paul Johnson ha scritto:
>
> > / Here's the error in your output:
> >
> > gperf: command not found
> >
> > That means you should install the package "gperf"
> >
> > please note I do not mean "my_java_dir" literally. I mean to point at 
> > where your system has java installed.  On my systems, it is 
> > /usr/java/j2sdk1.4.2_03
> >
> > Giovanni Maniscalco Basile wrote:
> >
> > > I tried to compile swarm-2.1.148.20041022 on a SuSE 9.0 system 
> > > following the instructions given by PJ:
> > >
> > > #cd swarm-2.1.148
> > > # mkdir builddir
> > > # cd builddir
> > > # CC=/usr/bin/gcc ../configure --prefix=/usr --enable-subdirs 
> > > --with-defaultdir=/usr --with-jdkdir=my_java_dir
> > >
> > > then
> > >
> > > # make
> > >
> > > the make process gave the following error:
> > >
> > > /home/maniba/swarm/swarm-2.1.148.20040122/builddir/_common.elc
> > > Done
> > > Wrote /home/maniba/swarm/swarm-2.1.148.20040122/builddir/_protocol.elc
> > > Done
> > > Wrote /home/maniba/swarm/swarm-2.1.148.20040122/builddir/_interface.elc
> > > Done
> > > Wrote /home/maniba/swarm/swarm-2.1.148.20040122/builddir/src/_getters.elc
> > > Done
> > > cc1: warning: "-Wno-protocol" is valid for ObjC but not for C/C++
> > > cc1: warning: "-fgnu-runtime" is valid for ObjC but not for C/C++
> > > cc1: warning: "-Wno-protocol" is valid for ObjC but not for C/C++
> > > cc1: warning: "-fgnu-runtime" is valid for ObjC but not for C/C++
> > > cc1: warning: "-Wno-protocol" is valid for ObjC but not for C/C++
> > > cc1: warning: "-fgnu-runtime" is valid for ObjC but not for C/C++
> > > ../../../src/misc/xmalloc.c:10: warning: empty declaration
> > > ../../../src/misc/xmalloc.c:11: warning: empty declaration
> > > ../../../src/misc/xmalloc.c:12: warning: empty declaration
> > > ../../../src/misc/xmalloc.c:13: warning: empty declaration
> > > Wrote 
> > > /home/maniba/swarm/swarm-2.1.148.20040122/builddir/src/defobj/_modulemap.elc
> > > Done
> > > /bin/sh: line 1: gperf: command not found
> > > make[5]: *** [../../../src/defobj/modulemap.c] Error 127
> > > make[4]: *** [all] Error 2
> > > make[3]: *** [all-recursive] Error 1
> > > make[2]: *** [all] Error 2
> > > make[1]: *** [all-recursive] Error 1
> > > make: *** [all] Error 2
> > >
> > >
> > > I attach the config.log and Makefile
> > >
> > > Thanks
> > >
> > > Giovanni Maniscalco Basile
> > >
> > > P.S. does it exists a newer version of Swarm?
> > > If so, where is it?
> > >
> > > GMB
> > >
> > > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Support mailing list
> > address@hidden/
> > /_http://www.swarm.org/mailman/listinfo/support_/


--
Paul E. Johnson                       email: address@hidden
Dept. of Political Science            http://lark.cc.ku.edu/~pauljohn
1541 Lilac Lane, Rm 504                              
University of Kansas                  Office: (785) 864-9086
Lawrence, Kansas 66044-3177           FAX: (785) 864-5700