RE: [Paparazzi-devel] power board

[Mohammed Abukhalid]

Thanks Antoine that really sets my mind at ease!! That board's a good idea to keep things neat.
 
> Date: Thu, 28 Jan 2010 22:50:11 +0100
> Subject: Re: [Paparazzi-devel] power board
> From: address@hidden
> To: address@hidden
>
> well.... I've used home made PCBs, so no solder mask and I have tined
> the tracks, but I don't think you should have any problem
>
> here are pics of what I did
>
> http://booz-dev.googlegroups.com/web/power_board_bot.jpg
> http://booz-dev.googlegroups.com/web/power_board_bot.jpg
>
>
> On Thu, Jan 28, 2010 at 6:56 PM, Mohammed Abukhalid
> <address@hidden> wrote:
> > Thanks for the reply! No its just 4 motors.. I was just saying the range was
> > 6A-14A ... and in all probability we are going to be running well below 14A.
> > The only concern that was raised was whether the traces on the pcb could
> > handle it. But if you've done it before with the same board then we're fine
> > for sure
> >
> >> Date: Thu, 28 Jan 2010 18:13:30 +0100
> >> Subject: Re: [Paparazzi-devel] power board
> >> From: address@hidden
> >> To: address@hidden
> >>
> >> the mosfet is rated 80 amps - I've made this board for my mikrokopter
> >> frame where the motors draw about the same current - you should be
> >> fine.
> >> or are you saying you are using 6 motors drawing each 14 amps ? in
> >> which case you'd be just over th limit
> >>
> >> On Thu, Jan 28, 2010 at 5:57 PM, Mohammed Abukhalid
> >> <address@hidden> wrote:
> >> > Hi all,
> >> >
> >> > I was wondering if anyone is familiar with the Booz power board design
> >> > enough to know its current limitations. Our motors are supposed to use
> >> > 6-14A
> >> > of current... Anyone know if the traces on booz power board can handle
> >> > that
> >> > much?
> >> >
> >> > Mohammed
> >> >
> >> > ________________________________
> >> > Spread the cheer with Messenger for mobile. Learn more.
> >> > _______________________________________________
> >> > Paparazzi-devel mailing list
> >> > address@hidden
> >> > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >> >
> >> >
> >>
> >>
> >> _______________________________________________
> >> Paparazzi-devel mailing list
> >> address@hidden
> >> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> > ________________________________
> > Tell the whole story with photos, right from your Messenger window. Learn
> > how!
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> >
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel

---

Spread the cheer with Messenger for mobile. Learn more.