[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] power board
From: |
antoine drouin |
Subject: |
Re: [Paparazzi-devel] power board |
Date: |
Thu, 28 Jan 2010 22:50:11 +0100 |
well.... I've used home made PCBs, so no solder mask and I have tined
the tracks, but I don't think you should have any problem
here are pics of what I did
http://booz-dev.googlegroups.com/web/power_board_bot.jpg
http://booz-dev.googlegroups.com/web/power_board_bot.jpg
On Thu, Jan 28, 2010 at 6:56 PM, Mohammed Abukhalid
<address@hidden> wrote:
> Thanks for the reply! No its just 4 motors.. I was just saying the range was
> 6A-14A ... and in all probability we are going to be running well below 14A.
> The only concern that was raised was whether the traces on the pcb could
> handle it. But if you've done it before with the same board then we're fine
> for sure
>
>> Date: Thu, 28 Jan 2010 18:13:30 +0100
>> Subject: Re: [Paparazzi-devel] power board
>> From: address@hidden
>> To: address@hidden
>>
>> the mosfet is rated 80 amps - I've made this board for my mikrokopter
>> frame where the motors draw about the same current - you should be
>> fine.
>> or are you saying you are using 6 motors drawing each 14 amps ? in
>> which case you'd be just over th limit
>>
>> On Thu, Jan 28, 2010 at 5:57 PM, Mohammed Abukhalid
>> <address@hidden> wrote:
>> > Hi all,
>> >
>> > I was wondering if anyone is familiar with the Booz power board design
>> > enough to know its current limitations. Our motors are supposed to use
>> > 6-14A
>> > of current... Anyone know if the traces on booz power board can handle
>> > that
>> > much?
>> >
>> > Mohammed
>> >
>> > ________________________________
>> > Spread the cheer with Messenger for mobile. Learn more.
>> > _______________________________________________
>> > Paparazzi-devel mailing list
>> > address@hidden
>> > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >
>> >
>>
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
> ________________________________
> Tell the whole story with photos, right from your Messenger window. Learn
> how!
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>