[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] On board data logging using TWOG

From: Christoph Niemann
Subject: Re: [Paparazzi-devel] On board data logging using TWOG
Date: Fri, 2 Mar 2012 12:47:32 +0100

Hi guys,

last year I had a similar problem. I solved it by using an OpenLog from Sparkfun. Thats less expensive than a second AP and is smaller as well. I hooked it into the UART lines for the Radiomodem. I wrote a simple module, you can find it here: .
It just includes a timestamp into the datastream every 500ms. Then to extract the data, I wrote a small tool that an be found here - It creates TLM files and you can proceed like described in



2012/3/2 Cédric Marzer <address@hidden>

I am trying to use the sparkfun logger (the one with the LPC2148).

I haven't been able to make it work so far but it shouldn't be so difficult (but I could install the paparazzi bootloader).

Maybe the guys with a better knowledge of the code might help me a little here.

Should I define a new board ? I need for instance to redefine the led pins…

Any help appreciated.



De : paparazzi-devel-bounces+spam1=address@hidden [mailto:paparazzi-devel-bounces+spam1=address@hidden] De la part de GURUGANESH R
Envoyé : vendredi, 2. mars 2012 11:39
À : address@hidden
Objet : [Paparazzi-devel] On board data logging using TWOG


  I have  few doubts regarding paparazzi AP
1) Please tell me how to do on board data logging when I am using paparazzi TWOG Autopilot board on my Micro Aerial Vehicle? I believe people might have already done this exercise. I know the Umarim board comes with a data logger but In case if i am using any of the tiny board what are the feasible options for on board data logging? Anybody please help me out.

2) I wanted to measure the motor/Propeller RPM, from the Internet I found Eagle tree has one Brush less RPM sensor to measure the motor/Propeller RPM, Does paparazzi board has provision to accept this RPM sensor measurement as Input? If yes how to do that?

Thanks and Regards

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]