[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] On board data logging using TWOG

From: Martin Mueller
Subject: Re: [Paparazzi-devel] On board data logging using TWOG
Date: Sun, 11 Mar 2012 15:25:25 +0100
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv: Gecko/20120216 Lightning/1.0b2 Thunderbird/3.1.19

Hi Cédric,

have added support for the Logomatic on the dev branch. Some general fixes for the logger were also needed.

Had not seen that Sparkfun board. Looks interesting, maybe a little too huge (only a few millimeters shorter than the Tiny). Had to add at least a large capacitor to the LiPo port to make it work. Otherwise the charge circuit kept the Vcc oscillating too much.

Needs some changed routing to make use of the LiPo together with an autopilot (USB Vbus <-> 5V from autopilot).


On 09.03.2012 14:14, Cédric Marzer wrote:

I am trying to make it run on that sparkfun board. I haven't achieved it
so far but I didn't insist much.

The paparazzi bootloader is working and that is a start.

To make the logger code work one has to redefine the leds and the button
and I am not sure how to make it yet.

There is certainly a clean way and a dirty way…

Any help appreciated.


*De :address@hidden
[mailto:address@hidden *De la part
de* Christophe De Wagter
*Envoyé :* vendredi, 9. mars 2012 12:27
*À :* address@hidden
*Objet :* Re: [Paparazzi-devel] On board data logging using TWOG

We had a defect TWOG board. On a new twog it runs out of the box.

Have you ever tried to run the code on one of these: ?


On Tue, Mar 6, 2012 at 9:14 AM, Martin Mueller <address@hidden
<mailto:address@hidden>> wrote:

Hi Christophe,

with the high PCLK setting included it worked for me


Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]