Re: [Paparazzi-devel] Blank GCS frame!

[Pascal Brisset]

Hi,

the funjet1.xml is configured for a Maxstream modem in API mode:

ap.CFLAGS += -DDOWNLINK -DUSE_UART1 -DDOWNLINK_TRANSPORT=XBeeTransport 
-DXBEE_UART=Uart1 -DDATALINK=XBEE -DUART1_BAUD=B9600

So it should work with a Maxstream ground session. Are you using the 
default "Flight address@hidden" session ? Note that this would not 
work with a default configured modem which speed is 9600. If it is the 
case, in the Paparazzi Center, stop the "link" agent,
edit the line, replacing 57600 by 9600 and restart the process. If it 
works, save your session for future use...

--Pascal

Mohammad Ali Haji Pour wrote:
> Hi all,
>
> I have some problem with the GCS as I mentioned earlier, but I have got any 
> help yet.
>
> I am using Tiny 2.11, commercial IR sensors from FMA, LEA-4P GPS, and Maxstream base and OEM. I have checked all the connections several times, and they are fine. The GPS is configured and I am getting data through u-center. 
>
> In PPZ center I am using funjet1.xml for airframe, basic.xml for flight plan 
> and setting, cockpitSX.xml for radio, and default.xml for telemetry. All are 
> made and uploaded to the Tiny.  I am also getting the red LED of Tiny. 
> Everything seems to be fine, but when I execute the Maxstream or serial 
> sessions all I get is a blank GCS frame; however, the simulation session is 
> working with these files.
>
> I would appreciate any help.
>
> Best Regards,
>
> Mohammad 
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>