help-grub
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Grub2 chainloader bootmgfw.efi not working


From: Vyacheslav Gonakhchyan
Subject: Re: Grub2 chainloader bootmgfw.efi not working
Date: Tue, 15 Sep 2015 01:18:03 +0300

I installed grub-git and efibootmgr-git and reproduced it.
If it matters could not build efivar-git so it's few month behind.


On Mon, Sep 14, 2015 at 7:42 PM, Andrei Borzenkov <address@hidden> wrote:
14.09.2015 15:36, Vyacheslav Gonakhchyan пишет:
My Grub2 is EFI. I use grub-install --target=x86_64-efi
--efi-directory=/boot/efi /dev/sda which calls efibootmgr to load
grubx64.efi into UEFI BIOS.


OK in this case message means that grub cannot find EFI handle for $root (i.e. in your case - partition gpt7). GRUB itself needs just disk reference and handles partitions internally. But when launching external binary it wants to pass it reference to device where it is located which means it must be exported and accessible by firmware.

The first step would be to try to reproduce it using upstream sources.


echo $grub_cpu $grub_platform
Sorry, can only check it later. I'm guessing x86_64, efi-64...

On Mon, Sep 14, 2015 at 4:11 PM, Andrei Borzenkov <address@hidden>
wrote:

On Mon, Sep 14, 2015 at 2:36 PM, Vyacheslav Gonakhchyan
<address@hidden> wrote:
Hi, everyone!

I have dual boot config Archlinux/Windows7 and latest packages. I am
booted
into grub rescue mode. Or use command line. I want to tell Grub2 to load
Windows Boot Loader bootmgfw.efi. Basically grub2 refuses to do it with
error "invalid root device".

Steps to reproduce:
set root=(hd1,gpt7)
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
Screen is flashing with "invalid root device".


Is your grub BIOS or EFI? What are values for grub_cpu and grub_platform?

echo $grub_cpu $grub_platform

So grub2 finds bootmgfw.efi but cannot give it control. I tried every
other
hd1,gpt combination to no avail.  I also tried setting root to one device
and loading bootmgfw.efi from another device(hd1,gpt7).
It's strange because I can load this file from shell (shellx64.efi)
within
UEFI BIOS without error. Any advice is appreciated.

Regards,
Viacheslav

_______________________________________________
Help-grub mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/help-grub






reply via email to

[Prev in Thread] Current Thread [Next in Thread]