[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Sending data from application to gpsd
From: |
Gary E. Miller |
Subject: |
Re: Sending data from application to gpsd |
Date: |
Mon, 18 May 2020 19:14:39 -0700 |
Yo raaj!
On Tue, 19 May 2020 10:06:18 +0800
raaj lokanathan <address@hidden> wrote:
> I am not sending UBlox command.
Then you are on your own. Each driver only knows how to send commands
to their type of receiver.
> What I will be doing is send the
> speed info directly from my application to the gpsd.
Oh, same words, different meaning now.
> And the. inside
> my driver_ubx.c I will extract the speed info and form the UBlox
> command before sending it to the receiver.
Good luck with that. Much easier to have your app just make the
required u-blox command to send. Then gpsd does not need changing.
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
address@hidden Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can't measure it, you can't improve it." - Lord Kelvin
pgpPTY2kAAGAZ.pgp
Description: OpenPGP digital signature
- Sending data from application to gpsd, raaj lokanathan, 2020/05/18
- Re: Sending data from application to gpsd, Gary E. Miller, 2020/05/18
- Re: Sending data from application to gpsd, raaj lokanathan, 2020/05/18
- Re: Sending data from application to gpsd, raaj lokanathan, 2020/05/18
- Re: Sending data from application to gpsd, Gary E. Miller, 2020/05/18
- Re: Sending data from application to gpsd, raaj lokanathan, 2020/05/19
- Re: Sending data from application to gpsd, Gary E. Miller, 2020/05/19
- Re: Sending data from application to gpsd, raaj lokanathan, 2020/05/19
- Re: Sending data from application to gpsd, Gary E. Miller, 2020/05/20
- Re: Sending data from application to gpsd,
Gary E. Miller <=