sms time after SMSC number error

[nemir nemiria]

Hi.

I needed to upgrade the OS on my gnokii box to the latest version (OpenBSD 
3.9).  My phone model is 6310i.

After the upgrade when I try to send an sms I get an error as follows:



Cannot read the SMSC number from your phone. If the sms send will fail, 
please use --smsc option explicitely giving the number.
Please enter SMS text. End your input with <cr><control-D>:here is a TEST    
    TEXT message.
^D
SMS Send failed (Command timed out.)


I turned on debug and got the following:


~>gnokii --sendsms 0444562327
GNOKII Version 0.6.12
LOG: debug mask is 0x1
phone instance config:
model: 6510
port_device: /dev/tty00
connection_type: 1
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/tty00
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x02 / 0x0006
00 01 00 14 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x02 / 0x0006
00 01 00 14 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x02 / 0x0006
00 01 00 14 01 00                               |
SM_Block: exiting the retry loop
Cannot read the SMSC number from your phone. If the sms send will fail, 
please use --smsc option explicitely giving the number.
Please enter SMS text. End your input with <cr><control-D>:here is a TEST    
    TEXT message.
General Data Coding
dcs: 0x8
Length: 0x3e
user_data_length: 0x3e
ValidityIndicator: 2
user_data: 
006800650072006500200069007300200061002000540045005300540009002000540045005800540020006D006500730073006100670065002E00200020
Sending
Sending SMS...(118)
Message sent: 0x02 / 0x0076
00 01 00 02 00 00 00 55 55 01 02 6c 11 00 00 08 |        UU  l
00 04 82 0c 01 07 0a 81 40 70 25 92 72 00 82 0c |         @p% r
02 01 00 00 00 00 00 00 00 00 80 48 3e 3e 00 68 |            H>> h
00 65 00 72 00 65 00 20 00 69 00 73 00 20 00 61 |  e r e   i s   a
00 20 00 54 00 45 00 53 00 54 00 09 00 20 00 54 |    T E S T     T
00 45 00 58 00 54 00 20 00 6d 00 65 00 73 00 73 |  E X T   m e s s
00 61 00 67 00 65 00 2e 00 20 00 20 55 55 55 55 |  a g e .    UUUU
55 55 08 04 01 a9                               | UU   ?
SM_Block: exiting the retry loop
SMS Send failed (Command timed out.)
Serial device: closing device




My .gnokiirc file looks like:


[global]
port = /dev/tty00
model = 6510
initlength = default
connection = dau9p
bindir = /usr/local/sbin/
use_locking = yes
serial_baudrate = 19200

smsc_timeout = 10

[connect_script]
TELEPHONE = 0419527967
[disconnect_script]

[logging]

debug = on
rlpdebug = off
xdebug = off


What is smsc?   I tried also with the command gnokii --sendsms 334534 --smsc 
1 as the help suggested,  with no success.

What do I need to do to get my gnokii working again?

TIA!

Nemir