[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Denemo-devel] trouble creating parts
From: |
Donald J. Stewart |
Subject: |
Re: [Denemo-devel] trouble creating parts |
Date: |
Mon, 14 Nov 2016 21:49:10 -0800 |
User-agent: |
KMail/5.1.3 (Linux/4.4.0-47-generic; KDE/5.18.0; x86_64; ; ) |
On Saturday, November 12, 2016 12:30:07 PM PST Richard Shann wrote:
> Sorry! There *is* a serious-looking error in the file as you originally
> posted it; near the top there is:
>
> #(define denemo-top-margin ...for they shall...)
>
> where the red-highlighting starts.
>
> it seems that in setting the top margin you inserted the text "... for
> they shall ..." instead of a number (such as 20). I deleted this and
> then ran typeset and got the sort of warning messages I wrote about
> below (they refer to another copy of your file that I extracted by
> tortuous means earlier...)
>
> It would be good for those margin setting commands to test out the
> syntax for validity before letting you insert things like that, I've put
> a bug report in for this.
>
> You would normally expect to be able to fix this by re-running the
> margin command, but in this case the bad value persists. To fix your
> score open up Score->Score Properties Editor and delete the TopMargin
> directive. There is a second TopMargin directive, which is (I guess) the
> one where you re-edited the top margin.
This worked. But what if I need to edit the new part? For example, I think
because I chose to 'hide empty measures', a number of measures don't
show up.
Is this normal behavior? Or is there something I have done incorrectly?
>
> Let me know when if you have a problem deleting this bad directive.
>
> Richard
>
> On Sat, 2016-11-12 at 11:53 +0000, Richard Shann wrote:
> > On Sat, 2016-11-12 at 10:14 +0000, Richard Shann wrote:
> > > On Sat, 2016-11-12 at 09:46 +0000, Richard Shann wrote:
> > > > On Sat, 2016-11-12 at 01:11 -0800, Donald J. Stewart wrote:
> > > > > I've attached the file.
> > > >
> > > > you have to compress the file before attaching it to the email.
> > >
> > > I've used the list-moderator interface to allow this email through so
> > > there should be no need to re-send it compressed on this occasion.
> >
> > The file has now arrived on the mailing list.
> > I've tested out the .denemo file attached to it.
> > The full score typesets with error messages in the LilyPond window:
> >
==========================================================================
> > ====== Typesetting ...Done/tmp/Denemo_UHBTQY/denemoprintB.ly:
685:346:
> > warning: unterminated hyphen; removing
> > Bless -- ed __ are __ the poor __ in spi -- rit... Bless -- ed __ are __
> > the meek... __ Bless -- ed __ are they __ that mourn... Bless -- ed are
> > they __ that hun -- ger and thirst __ af -- ter jus -- tice..=2E __
> > Bless -- ed, __ bless -- ed are __ the mer -- ci -- ful... __ Bless --
> > ed __ are __ the __ peace -- mak -- ers, __ the peace -- mak
> >
> > -- ers. __ jus -- tice... __ __ af -- __ Bless-
> > /tmp/Denemo_UHBTQY/denemoprintB.ly:1081:21: warning:
unterminated
> > decrescendo
> >
> > f-\fermata
> >
> > \decr \AutoEndMovementBarline
> >
> > /tmp/Denemo_UHBTQY/denemoprintB.ly:81:79: warning:
decrescendo too small
> >
> > f'' f'' \cr g'' g'' f'' f'' g'' g'' f'' f'' g'' g''<> \ff
> >
> > bes''4:32
> >
> > \decr~ \!\AutoBarline
> > /tmp/Denemo_UHBTQY/denemoprintB.ly:690:23: warning: cannot
resolve rest
> > collision: rest direction not set
> >
> > \tempo 4=84
> >
> > r1\AutoBarline
> >
> > ...
> >
> >
==========================================================================
> > ======
> >
> > The first message is about your lyrics - I'm not an expert on LilyPond
> > lyric syntax - you have doubled hyphens and doubled underscores -
should
> > these be doubled? Should not the hyphens be attached to the
previous
> > syllable (i.e. no space)?
> >
> > The second message says you have a decr start with no decr end
later.
> >
> > The last message is for part writing, where you have more than one
rest
> > at one moment and have not specified which voice they are in, or if
they
> > are to be combined (see Staffs/Voices->Voices menu).
> >
> > However, these are all just Warning messages, and so you *do* get a
> > typeset score.
> >
> > Putting the cursor in the top staff in the Denemo Display and clicking
> > Part in the Print View also typesets with warning, attached is the PDF
> > created by clicking the PDF button. The LilyPond window shows the
> > following warnings in the lower pane in this case:
> >
> >
==========================================================================
> > ====== Typesetting ...Done/tmp/Denemo_UHBTQY/denemoprintA.ly:
36:50:
> > warning: crescendo too small
> >
> > g'?2.-\tenuto \decr<> \p d'4\glissando
> >
> > \cr( \!\AutoBarline
> >
> > /tmp/Denemo_UHBTQY/denemoprintA.ly:81:79: warning:
decrescendo too small
> >
> > f'' f'' \cr g'' g'' f'' f'' g'' g'' f'' f'' g'' g''<> \ff
> >
> > bes''4:32
> >
> > \decr~ \!\AutoBarline
> > /tmp/Denemo_UHBTQY/denemoprintA.ly:163:77: warning:
decrescendo too
> > small
> >
> > bes'4-\tenuto<> \f a'4-\tenuto aes'4-\tenuto<> \mf
> >
> > ges'4-\tenuto
> >
> > \decr\AutoBarline
> > /tmp/Denemo_UHBTQY/denemoprintA.ly:189:139: warning:
decrescendo too
> > small
> >
> > <> \f<> ^\markup \italic {"con sord." } cis''16 \cr dis'' e''
> >
> > fis'' cis'' dis'' e'' fis'' cis'' dis'' e'' fis''<> \ff gis''4:32
> >
> > \decr~ \!\AutoBarli...
> >
==========================================================================
> > ======
> >
> > the cursor does indeed move to the first of these warnings at Staff 1,
> > bar 15 on the last note. And indeed the crescendo between the d'4
(which
> > is a d 1/4) note and the following ees''8 (an e-flat 1/8th) note is
> > rendered as a squashed up line. LilyPond is not clever enough to fix
> > this for you by giving extra space.
> > Searching in the View->Command Center for "cres" I came to
> >
> > Command: Lengthen Hairpin
> > Inserts a directive to lengthen the following cresc or dim hairpin.
> > Location: ObjectMenu->NotesRests->Markings->Dynamics
> > Internal Name: LengthenHairpin
> >
> > which may help in this situation.
> >
> > I also put the cursor in the Soprano staff and clicked Part in the Print
> > View - this typeset without warning messages - as it involves those __
> > and -- in the lyrics I guess they are all right - the "warning:
> > unterminated hyphen; removing" message above must refer to some
other
> > verse.
> >
> > HTH
> >
> > Richard
> >
> >
> >
> > _______________________________________________
> > Denemo-devel mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/denemo-devel
- Re: [Denemo-devel] trouble creating parts, (continued)
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/12
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/12
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/12
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/14
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/15
- Re: [Denemo-devel] trouble creating parts, Andreas Schneider, 2016/11/15
- Re: [Denemo-devel] trouble creating parts, Jeremiah Benham, 2016/11/15
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/15
- Re: [Denemo-devel] trouble creating parts, Andreas Schneider, 2016/11/15
- Re: [Denemo-devel] trouble creating parts, Andreas Schneider, 2016/11/15
- Re: [Denemo-devel] trouble creating parts,
Donald J. Stewart <=
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/15
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/15
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/15
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/15
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/16
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/16
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/16
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/16
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/17
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/17