[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [RULE] Xircom NIC: xirc2ps_cs.o doesn't load.
From: |
bugler |
Subject: |
Re: [RULE] Xircom NIC: xirc2ps_cs.o doesn't load. |
Date: |
Fri, 21 May 2004 13:41:07 -0600 |
User-agent: |
Internet Messaging Program (IMP) 3.2.1 / FreeBSD-4.8 |
Marco,
No, I'm fairly certain that FC2 is not the problem. I haven't even gotten that
far, yet... otherwise I would have posted to the FC2 list. I'm still
struggling with slinky. However, searching Red Hat's archives did yield some
better information.
The problem with xirc2ps_cs.o is that in /scripts/pcmcia.sh, I changed PCIC
from i82365 to xirc2ps_cs.
Now, while I still can't get i82365 to work, I've confirmed that it's the
correct PCIC. My PCMCIA controller is a Cirrus Logic CL-PD6730 (PCI bus)...
and so I need to use i82365.
I tried fiddling with options on "insmod i82365"... but to no avail... not even
the options in the man page directed toward the Cirrus Logic chip.
I recently found /etc/pcmcia/config.opts, and I'm guessing that I might need to
fiddle around in there... but thus far it's yielded no fruit.
Here's my session... no edits... using slinky v0.3.96. Anybody got an idea?
#######################################################################
boot: linux dd updates
Loading vmlinuz........
loading rootfs.gz........
(A lot of stuff went by fast)
hda:1058400 sectors (542 MB) w/96KiB Cache, CHS=525/32/63
IDE-FLOPPY DRIVER 0.99.NEWIDE
Partition check:
hda:
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 2048K size 1024 blocksize
loop: loaded (max 8 devices)
ide-floppy driver 0.99.newide
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 659k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel emmory: 152k freed
init started: BusyBox v0.60.5 (2002.12.11-03:01+0000) multi-call binary
You may start the RULE project's slinky installer, or answer
'no' to drop out to a shell prompt.
Would you like to begin the installation process? [ yes / no ] : no
When you are ready to begin installation, simply
execute /scripts/setup.sh.
BusyBox v0.60.5 (2002.12.11-03:01+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
#
(here, I put in the PCMCIA disk)
# mount /mnt/floppy
mount: /dev/fd0 is write-protected, mounting read-only
# /mnt/floppy/setup_pcmcia.sh
Edit /scripts/init_network.sh for your needs.
You may also want to edit /scripts/pcmcia.sh
if you need to define base options or modules.
Then execute '/scripts/pcmcia.sh start' to
Initialize the pcmcia services and bring up
the network.
After the network is up, unmount the floppy.
#
(To keep it simple... let's not worry about the network just yet.)
# /scripts/pcmcia.sh start
$Starting PCMCIA services:Using /mnt/floppy/modules/pcmcia/pcmcia_core.o
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus]
Using /mnt/floppy/modules/pcmcia/i82365.o
Intel PCIC probe: not found.
insmod: init_module: i82365: No such device
Using /mnt/floppy/modules/pcmcia/ds.o
ds: no socket drivers loaded!
insmod: init_module: ds: Operation not permitted
May 21 19:37:16 cardmgr[113]: starting version is 3.1.22
May 21 19:37:16 cardmgr[113]: config error, file 'config' line 1053: syntax
error
May 21 19:37:16 cardmgr[113]: config error, file 'config' line 2129: no
function bindings
May 21 19:37:16 cardmgr[113]: no pcmcia driver in /proc/devices
May 21 19:37:16 cardmgr[113]: exiting
insmod: tulip.o: no module by that name found
SIOCSIFADDR: No such device
SIOCSIFNETMASK: No such device
SIOCADDRT: Network is unreachable
#
###########################################################################
Quoting Marco Fioretti <address@hidden>:
> > Upon your suggestion, I'm trying a network install.
> > However, I can't get the PCMCIA NIC to work. When
> > /scripts/pcmcia.sh gets to ln 96, here's what happens:
> >
> > $/sbin/insmod $PC/xirc2ps_cs.o
>
>
> Gabriel,
>
> I have *no* idea if this is even remotely related to your
> problem, but have you checked the last week or so of
> the fedora-list archives?
> Other people were having problems with the PCMCIA
> setup, and then found a solution (which I obviously
> don't remember, and have no web access now, sorry...)
>
> HTH,
> Marco F.
>
>
>
> _______________________________________________
> Rule Project HOME PAGE: http://www.rule-project.org/en/
> Rule Development Site: http://savannah.gnu.org/projects/rule/
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/rule-list
>
- Re: [RULE] Xircom NIC: xirc2ps_cs.o doesn't load., (continued)
- Re: [RULE] Xircom NIC: xirc2ps_cs.o doesn't load., Michael Fratoni, 2004/05/27
- [RULE] That @$#! laptop (was: xirc2ps_cs.o .... ), bugler, 2004/05/28
- Re: [RULE] Xircom NIC: xirc2ps_cs.o doesn't load., M. Fioretti, 2004/05/29
- Re: [RULE] Xircom NIC: xirc2ps_cs.o doesn't load., C David Rigby, 2004/05/30
- [RULE] Thoughts on new slinky installer for FC2, C David Rigby, 2004/05/30
Re: [RULE] Xircom NIC: xirc2ps_cs.o doesn't load., M. Fioretti, 2004/05/24
Re: [RULE] Xircom NIC: xirc2ps_cs.o doesn't load.,
bugler <=
FWD: Fwd: Re: [RULE] Xircom NIC: xirc2ps_cs.o doesn't load., M. Fioretti, 2004/05/28