Re: [open-cobol-list] Strange Terminal output

[Jeffrey Chimene]

On 02/07/2013 03:22 PM, Jeffrey Chimene wrote:
> On 02/07/2013 02:18 PM, Paride Desimone wrote:
>> Il 07/02/2013 20:05 Brian Tiffin ha scritto:
>>
>> Hi Brian,
>>
>>> For more infomation (might not help, but might), can you post the 
>>> output of
>>>
>>> stty -a
>> This is output of stty -a, from gnome-terminal:
>>
>> speed 38400 baud; rows 24; columns 80; line = 0;
>> intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 
>> = M-^?;
>> swtch = M-^?; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = 
>> ^W;
>> lnext = ^V; flush = ^O; min = 1; time = 0;
>> -parenb -parodd cs8 hupcl -cstopb cread -clocal -crtscts
>> -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
>> -ixoff
>> -iuclc ixany imaxbel iutf8
>> opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
>> vt0 ff0
>> isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop 
>> -echoprt
>> echoctl echoke
>>
>>
>> This is output of stty -a, from tty1 (without X):
>>
>> speed 38400 baud; rows 30; columns 106; line = 0;
>> intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
>> eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; 
>> rprnt = ^R;
>> werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0;
>> -parenb -parodd cs8 hupcl -cstopb cread -clocal -crtscts
>> -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
>> ixoff
>> -iuclc -ixany -imaxbel -iutf8
>> opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
>> vt0 ff0
>> isig icanon -iexten echo echoe echok -echonl -noflsh -xcase -tostop 
>> -echoprt
>> echoctl echoke
>>
>> Paride
> Both terminals are utf8. I'm going for the COBOL source specifying a
> different encoding. Is that possible in OC?
>
Check that. Input in Gnome is UTF8, input at the console is not.