Re: [Discuss-gnuradio] Building gnuradio master fails

[Ralph A. Schmid, dk5ras]

Hi,

Forgot to mention that of course I already did so - with no success...

Ralph.

> -----Original Message-----
> From: Kostis Triantafyllakis [mailto:address@hidden
> Sent: Saturday, 20 May, 2017 18:19
> To: Ralph A. Schmid, dk5ras; address@hidden
> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
> 
> Hello,
> 
> Cleaning (or even deleting the whole build directory) before rebuilding,
> had helped me in similar cases.
> Maybe you could give it a try
> 
> Best,
> Kostis
> 
> 
> On 05/20/2017 06:58 PM, Ralph A. Schmid, dk5ras wrote:
> > Hi,
> >
> > on a Kubuntu 16.04 system building gnuradio from source fails. Branch is
> > master, downloaded right now.
> >
> > UHD is also the latest version from right now.
> >
> > Any ideas what it could be? Here the output:
> >
> >
> > [ 99%] Built target _trellis_swig1
> > [ 99%] Building CXX object
> > gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o
> >
> > [ 99%] Built target _trellis_swig0
> > [ 99%] Built target pygen_gr_uhd_swig_08777
> > [ 99%] Built target pygen_gr_video_sdl_swig_ce2c9
> > [ 99%] Built target pygen_gr_vocoder_swig_43253
> > [ 99%] Built target _video_sdl_swig
> > [ 99%] Built target _vocoder_swig
> > [ 99%] Built target pygen_gr_fcd_swig_c4332
> > [ 99%] Built target _fcd_swig
> > [ 99%] Built target pygen_gr_wavelet_swig_89b19
> > [ 99%] Built target _wavelet_swig
> > [ 99%] Built target pygen_gr_wxgui_swig_78659
> > [100%] Built target _wxgui_swig
> > [100%] Built target pygen_gr_zeromq_swig_4d7be
> > [100%] Built target _zeromq_swig
> > /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In
> function
> > ‘PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*, PyObject*,
> > PyObject*)’:
> > /home/ras/gnuradio/build/gr-
> uhd/swig/uhd_swigPYTHON_wrap.cxx:27935:15:
> > error: ‘class uhd::usrp::dboard_iface’ has no member named
‘set_gpio_debug’
> >         (arg1)->set_gpio_debug(arg2,arg3);
> >                 ^
> > /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In
> function
> > ‘PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*, PyObject*,
> > PyObject*)’:
> > /home/ras/gnuradio/build/gr-
> uhd/swig/uhd_swigPYTHON_wrap.cxx:29301:16:
> > error: ‘class uhd::usrp::dboard_iface’ has no member named
‘set_gpio_debug’
> >         (*arg1)->set_gpio_debug(arg2,arg3);
> >                  ^
> > /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In
> function
> > ‘void init_uhd_swig()’:
> > /home/ras/gnuradio/build/gr-
> uhd/swig/uhd_swigPYTHON_wrap.cxx:49517:91:
> > error: ‘ATR_REG_IDLE’ is not a member of ‘uhd::usrp::dboard_iface’
> >   ant(d, "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int
> >> (uhd::usrp::
> >                                                                       ^
> > /home/ras/gnuradio/build/gr-
> uhd/swig/uhd_swigPYTHON_wrap.cxx:49518:94:
> > error: ‘ATR_REG_TX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’
> >   (d, "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int
> >> (uhd::usrp::
> >                                                                       ^
> > /home/ras/gnuradio/build/gr-
> uhd/swig/uhd_swigPYTHON_wrap.cxx:49519:94:
> > error: ‘ATR_REG_RX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’
> >   (d, "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int
> >> (uhd::usrp::
> >                                                                       ^
> > /home/ras/gnuradio/build/gr-
> uhd/swig/uhd_swigPYTHON_wrap.cxx:49520:98:
> > error: ‘ATR_REG_FULL_DUPLEX’ is not a member of
‘uhd::usrp::dboard_iface’
> >   "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< int
> >> (uhd::usrp::
> >                                                                       ^
> > gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:70: recipe for target
> > 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o' failed
> > make[2]: ***
> > [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o] Error
> 1
> > CMakeFiles/Makefile2:15016: recipe for target
> > 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed
> > make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2
> > Makefile:160: recipe for target 'all' failed
> >
> >
> >
> > --
> >
> > Ralph A. Schmid
> > Mondstr. 10
> > 90762 Fürth
> > +49-171-3631223
> > address@hidden
> > http://www.bclog.de/
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >