Re: [Discuss-gnuradio] Building gnuradio master fails

[address@hidden]

Full cmake output at 
https://pastebin.com/4uwwZbcW

Here is the relevant portion of the cmake output. Everything is found.
Now I suppose I could downgrade the libraries if that helps.

-- Checking for module 'gsl >= 1.10'
--   Found gsl , version 2.3
-- Found GSL: gsl;gslcblas;m  
--
-- Configuring gr-fec support...
--   Dependency ENABLE_VOLK = ON
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Enabling gr-fec support.
--   Override with -DENABLE_GR_FEC=ON/OFF



On Mon, 22 May 2017 23:03:15 -0700
Cinaed Simson <address@hidden> wrote:

> On 05/21/2017 08:02 PM, address@hidden wrote:
> > It seems opensuse runs an old rev of gsl. Here are the relevant file
> > names and revs:
> > 
> > gsl 1.16-74
> > gsl-devel 2.3-9.1
> > libgsl19 2.3-9.1
> > libgslblas0 2.3-9.1
> > python-pygsl 0.9.5-2.30
> > python-pygsl-devel 0.9.5-2.30  
> 
> I'm running release version 3.7.11 with gsl-1.16.
> 
> Actually, now that I think about it, I would be suprised if it built
> gr-fec without gsl.
> 
> It may not a be gsl problem - your mileage may vary depending upon the
> version of gnuradio you're running.
> 
> Create a new build directory and run cmake - it will tell you if
> there's a problem with gsl.
> 
> -- Cinaed
> 
> > 
> > Using the science repo, I can upgrade gsl to rev 2.3. Yast will
> > have to deinstall a number of programs such as krita and more
> > significant, inkscape. I can build what breaks from source if the
> > rev of gsl is the problem.
> > 
> > 
> > On Sun, 21 May 2017 18:08:36 -0700
> > address@hidden wrote:
> >   
> >>
> >> "Latest commit 0e32fca 4 days ago." That comes right off of github.
> >> https://github.com/gnuradio/gnuradio
> >>
> >> When I'm on that machine, I will research what I have for the gnu
> >> scientific library. I have it, but don't know if it is up to date.
> >>
> >>
> >>   Original Message  
> >> From: Cinaed Simson
> >> Sent: Sunday, May 21, 2017 5:52 PM
> >> To: address@hidden
> >> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
> >>
> >> On 05/21/2017 01:27 AM, address@hidden wrote:  
> >>> FWIW, I just compiled 0e32fca on opensuse. It builds just fine,
> >>> but I'm failing all the polar tests. Yeah I have scipy installed.
> >>> I'll start a new thread on that when I've totally given up
> >>> debugging. But the code on that rev is buildable on my PC.  
> >>
> >> I have no idea what 0e32fca is - looks like an arbitrary hex tag -
> >> but if the tests in gr-fec are failing it's most likely because
> >> development version of gsl wasn't installed - or it's the wrong
> >> version.
> >>
> >> Can you simply install gsl and be on your merry way? Unlikely.
> >>
> >> -- Cinaed
> >>
> >>  
> >>>
> >>>
> >>> On Sun, 21 May 2017 08:13:28 +0200
> >>> "Ralph A. Schmid, dk5ras" <address@hidden> wrote:
> >>>  
> >>>> This is also my experience, I made exactly this, deleting the
> >>>> build dir, make a new one, fresh cmake, and so on.
> >>>>
> >>>> Ralph.
> >>>>
> >>>>  
> >>>>> -----Original Message-----
> >>>>> From: address@hidden [mailto:address@hidden
> >>>>> Sent: Saturday, 20 May, 2017 20:50
> >>>>> To: Ralph A. Schmid, dk5ras; 'Kostis Triantafyllakis';
> >>>>> address@hidden Subject: Re: [Discuss-gnuradio]
> >>>>> Building gnuradio master fails
> >>>>>
> >>>>> Be that as it may, I have noticed that the first "cmake../",
> >>>>> that is a fresh directory, produces different output than a
> >>>>> "make clean" followed by "cmake ../". ‎ I've made it a point to
> >>>>> do a "rm -r build".
> >>>>>
> >>>>> By output, I means whatever is written to standard output. I
> >>>>> don't know if a fresh directly effects the actual build or not.
> >>>>>
> >>>>> Original Message
> >>>>> From: Ralph A. Schmid, dk5ras
> >>>>> Sent: Saturday, May 20, 2017 11:32 AM
> >>>>> To: 'Kostis Triantafyllakis'; address@hidden
> >>>>> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
> >>>>>
> >>>>> Hi,
> >>>>>
> >>>>> Forgot to mention that of course I already did so - with no
> >>>>> success...
> >>>>>
> >>>>> Ralph.
> >>>>>  
> >>>>>> -----Original Message-----
> >>>>>> From: Kostis Triantafyllakis [mailto:address@hidden
> >>>>>> Sent: Saturday, 20 May, 2017 18:19
> >>>>>> To: Ralph A. Schmid, dk5ras; address@hidden
> >>>>>> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
> >>>>>>
> >>>>>> Hello,
> >>>>>>
> >>>>>> Cleaning (or even deleting the whole build directory) before
> >>>>>> rebuilding, had helped me in similar cases.
> >>>>>> Maybe you could give it a try
> >>>>>>
> >>>>>> Best,
> >>>>>> Kostis
> >>>>>>
> >>>>>>
> >>>>>> On 05/20/2017 06:58 PM, Ralph A. Schmid, dk5ras wrote:   
> >>>>>>> Hi,
> >>>>>>>
> >>>>>>> on a Kubuntu 16.04 system building gnuradio from source fails.
> >>>>>>> Branch is master, downloaded right now.
> >>>>>>>
> >>>>>>> UHD is also the latest version from right now.
> >>>>>>>
> >>>>>>> Any ideas what it could be? Here the output:
> >>>>>>>
> >>>>>>>
> >>>>>>> [ 99%] Built target _trellis_swig1
> >>>>>>> [ 99%] Building CXX object
> >>>>>>> gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o
> >>>>>>>
> >>>>>>> [ 99%] Built target _trellis_swig0
> >>>>>>> [ 99%] Built target pygen_gr_uhd_swig_08777
> >>>>>>> [ 99%] Built target pygen_gr_video_sdl_swig_ce2c9
> >>>>>>> [ 99%] Built target pygen_gr_vocoder_swig_43253
> >>>>>>> [ 99%] Built target _video_sdl_swig
> >>>>>>> [ 99%] Built target _vocoder_swig
> >>>>>>> [ 99%] Built target pygen_gr_fcd_swig_c4332
> >>>>>>> [ 99%] Built target _fcd_swig
> >>>>>>> [ 99%] Built target pygen_gr_wavelet_swig_89b19
> >>>>>>> [ 99%] Built target _wavelet_swig
> >>>>>>> [ 99%] Built target pygen_gr_wxgui_swig_78659
> >>>>>>> [100%] Built target _wxgui_swig
> >>>>>>> [100%] Built target pygen_gr_zeromq_swig_4d7be
> >>>>>>> [100%] Built target _zeromq_swig
> >>>>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
> >>>>>>> In   
> >>>>>> function   
> >>>>>>> ‘PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*,
> >>>>>>> PyObject*, PyObject*)’:
> >>>>>>> /home/ras/gnuradio/build/gr-   
> >>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:27935:15:  
> >>>>>>> error: ‘class uhd::usrp::dboard_iface’ has no member named   
> >>>>> ‘set_gpio_debug’   
> >>>>>>> (arg1)->set_gpio_debug(arg2,arg3);
> >>>>>>> ^
> >>>>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
> >>>>>>> In   
> >>>>>> function   
> >>>>>>> ‘PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*,  
> >>>>> PyObject*,   
> >>>>>>> PyObject*)’:
> >>>>>>> /home/ras/gnuradio/build/gr-   
> >>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:29301:16:  
> >>>>>>> error: ‘class uhd::usrp::dboard_iface’ has no member named   
> >>>>> ‘set_gpio_debug’   
> >>>>>>> (*arg1)->set_gpio_debug(arg2,arg3);
> >>>>>>> ^
> >>>>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
> >>>>>>> In   
> >>>>>> function   
> >>>>>>> ‘void init_uhd_swig()’:
> >>>>>>> /home/ras/gnuradio/build/gr-   
> >>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49517:91:  
> >>>>>>> error: ‘ATR_REG_IDLE’ is not a member of
> >>>>>>> ‘uhd::usrp::dboard_iface’ ant(d,
> >>>>>>> "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int   
> >>>>>>>> (uhd::usrp::   
> >>>>>>> ^
> >>>>>>> /home/ras/gnuradio/build/gr-   
> >>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49518:94:  
> >>>>>>> error: ‘ATR_REG_TX_ONLY’ is not a member of
> >>>>>>> ‘uhd::usrp::dboard_iface’ (d,
> >>>>>>> "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast<
> >>>>>>> int   
> >>>>>>>> (uhd::usrp::   
> >>>>>>> ^
> >>>>>>> /home/ras/gnuradio/build/gr-   
> >>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49519:94:  
> >>>>>>> error: ‘ATR_REG_RX_ONLY’ is not a member of
> >>>>>>> ‘uhd::usrp::dboard_iface’ (d,
> >>>>>>> "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast<
> >>>>>>> int   
> >>>>>>>> (uhd::usrp::   
> >>>>>>> ^
> >>>>>>> /home/ras/gnuradio/build/gr-   
> >>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49520:98:  
> >>>>>>> error: ‘ATR_REG_FULL_DUPLEX’ is not a member of   
> >>>>> ‘uhd::usrp::dboard_iface’   
> >>>>>>> "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast<
> >>>>>>> int   
> >>>>>>>> (uhd::usrp::   
> >>>>>>> ^
> >>>>>>> gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:70: recipe for
> >>>>>>> target
> >>>>>>> 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o'  
> >>>>> failed   
> >>>>>>> make[2]: ***
> >>>>>>> [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o]  
> >>>>> Error   
> >>>>>> 1   
> >>>>>>> CMakeFiles/Makefile2:15016: recipe for target
> >>>>>>> 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed
> >>>>>>> make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error
> >>>>>>> 2 Makefile:160: recipe for target 'all' failed
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> --
> >>>>>>>
> >>>>>>> Ralph A. Schmid
> >>>>>>> Mondstr. 10
> >>>>>>> 90762 Fürth
> >>>>>>> +49-171-3631223
> >>>>>>> address@hidden
> >>>>>>> http://www.bclog.de/
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> Discuss-gnuradio mailing list
> >>>>>>> address@hidden
> >>>>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >>>>>>>  
> >>>>>
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> Discuss-gnuradio mailing list
> >>>>> address@hidden
> >>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio   
> >>>>  
> >>>
> >>>
> >>> _______________________________________________
> >>> Discuss-gnuradio mailing list
> >>> address@hidden
> >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >>>  
> >>
> >>
> >> _______________________________________________
> >> Discuss-gnuradio mailing list
> >> address@hidden
> >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >>
> >> _______________________________________________
> >> Discuss-gnuradio mailing list
> >> address@hidden
> >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio  
> > 
> >   
>