[Discuss-gnuradio] Building gnuradio master fails

[Ralph A. Schmid, dk5ras]

Hi,

on a Kubuntu 16.04 system building gnuradio from source fails. Branch is
master, downloaded right now.

UHD is also the latest version from right now.

Any ideas what it could be? Here the output:


[ 99%] Built target _trellis_swig1
[ 99%] Building CXX object
gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o

[ 99%] Built target _trellis_swig0
[ 99%] Built target pygen_gr_uhd_swig_08777
[ 99%] Built target pygen_gr_video_sdl_swig_ce2c9
[ 99%] Built target pygen_gr_vocoder_swig_43253
[ 99%] Built target _video_sdl_swig
[ 99%] Built target _vocoder_swig
[ 99%] Built target pygen_gr_fcd_swig_c4332
[ 99%] Built target _fcd_swig
[ 99%] Built target pygen_gr_wavelet_swig_89b19
[ 99%] Built target _wavelet_swig
[ 99%] Built target pygen_gr_wxgui_swig_78659
[100%] Built target _wxgui_swig
[100%] Built target pygen_gr_zeromq_swig_4d7be
[100%] Built target _zeromq_swig
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In function
‘PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*, PyObject*,
PyObject*)’:
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:27935:15:
error: ‘class uhd::usrp::dboard_iface’ has no member named ‘set_gpio_debug’
       (arg1)->set_gpio_debug(arg2,arg3);
               ^
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In function
‘PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*, PyObject*,
PyObject*)’:
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:29301:16:
error: ‘class uhd::usrp::dboard_iface’ has no member named ‘set_gpio_debug’
       (*arg1)->set_gpio_debug(arg2,arg3);
                ^
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In function
‘void init_uhd_swig()’:
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:49517:91:
error: ‘ATR_REG_IDLE’ is not a member of ‘uhd::usrp::dboard_iface’
 ant(d, "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int
>(uhd::usrp::
                                                                     ^
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:49518:94:
error: ‘ATR_REG_TX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’
 (d, "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int
>(uhd::usrp::
                                                                     ^
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:49519:94:
error: ‘ATR_REG_RX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’
 (d, "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int
>(uhd::usrp::
                                                                     ^
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:49520:98:
error: ‘ATR_REG_FULL_DUPLEX’ is not a member of ‘uhd::usrp::dboard_iface’
 "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< int
>(uhd::usrp::
                                                                     ^
gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:70: recipe for target
'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o' failed
make[2]: ***
[gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o] Error 1
CMakeFiles/Makefile2:15016: recipe for target
'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed
make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2
Makefile:160: recipe for target 'all' failed



--

Ralph A. Schmid
Mondstr. 10
90762 Fürth
+49-171-3631223
address@hidden
http://www.bclog.de/