Re: [Discuss-gnuradio] Building gnuradio master fails

[address@hidden]

FWIW, I just compiled 0e32fca  on opensuse. It builds just fine,  but
I'm failing all the polar tests. Yeah I have scipy installed. I'll
start a new thread on that when I've totally given up debugging. But
the code on that rev is buildable on my PC.


On Sun, 21 May 2017 08:13:28 +0200
"Ralph A. Schmid, dk5ras" <address@hidden> wrote:

> This is also my experience, I made exactly this, deleting the build
> dir, make a new one, fresh cmake, and so on.
> 
> Ralph.
> 
> 
> > -----Original Message-----
> > From: address@hidden [mailto:address@hidden
> > Sent: Saturday, 20 May, 2017 20:50
> > To: Ralph A. Schmid, dk5ras; 'Kostis Triantafyllakis';
> > address@hidden Subject: Re: [Discuss-gnuradio] Building
> > gnuradio master fails
> > 
> > Be that as it may, I have noticed that the first "cmake../", that
> > is a fresh directory, produces different output than a "make clean"
> > followed by "cmake ../". ‎ I've made it a point to do a "rm -r
> > build".
> > 
> > By output, I means whatever is written to standard output. I don't
> > know if a fresh directly effects the actual build or not.
> > 
> >   Original Message
> > From: Ralph A. Schmid, dk5ras
> > Sent: Saturday, May 20, 2017 11:32 AM
> > To: 'Kostis Triantafyllakis'; address@hidden
> > Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
> > 
> > Hi,
> > 
> > Forgot to mention that of course I already did so - with no
> > success...
> > 
> > Ralph.
> >   
> > > -----Original Message-----
> > > From: Kostis Triantafyllakis [mailto:address@hidden
> > > Sent: Saturday, 20 May, 2017 18:19
> > > To: Ralph A. Schmid, dk5ras; address@hidden
> > > Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
> > >
> > > Hello,
> > >
> > > Cleaning (or even deleting the whole build directory) before
> > > rebuilding, had helped me in similar cases.
> > > Maybe you could give it a try
> > >
> > > Best,
> > > Kostis
> > >
> > >
> > > On 05/20/2017 06:58 PM, Ralph A. Schmid, dk5ras wrote:  
> > > > Hi,
> > > >
> > > > on a Kubuntu 16.04 system building gnuradio from source fails.
> > > > Branch is master, downloaded right now.
> > > >
> > > > UHD is also the latest version from right now.
> > > >
> > > > Any ideas what it could be? Here the output:
> > > >
> > > >
> > > > [ 99%] Built target _trellis_swig1
> > > > [ 99%] Building CXX object
> > > > gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o
> > > >
> > > > [ 99%] Built target _trellis_swig0
> > > > [ 99%] Built target pygen_gr_uhd_swig_08777
> > > > [ 99%] Built target pygen_gr_video_sdl_swig_ce2c9
> > > > [ 99%] Built target pygen_gr_vocoder_swig_43253
> > > > [ 99%] Built target _video_sdl_swig
> > > > [ 99%] Built target _vocoder_swig
> > > > [ 99%] Built target pygen_gr_fcd_swig_c4332
> > > > [ 99%] Built target _fcd_swig
> > > > [ 99%] Built target pygen_gr_wavelet_swig_89b19
> > > > [ 99%] Built target _wavelet_swig
> > > > [ 99%] Built target pygen_gr_wxgui_swig_78659
> > > > [100%] Built target _wxgui_swig
> > > > [100%] Built target pygen_gr_zeromq_swig_4d7be
> > > > [100%] Built target _zeromq_swig
> > > > /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
> > > > In  
> > > function  
> > > > ‘PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*,
> > > > PyObject*, PyObject*)’:
> > > > /home/ras/gnuradio/build/gr-  
> > > uhd/swig/uhd_swigPYTHON_wrap.cxx:27935:15:  
> > > > error: ‘class uhd::usrp::dboard_iface’ has no member named  
> > ‘set_gpio_debug’  
> > > > (arg1)->set_gpio_debug(arg2,arg3);
> > > > ^
> > > > /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
> > > > In  
> > > function  
> > > > ‘PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*,  
> > PyObject*,  
> > > > PyObject*)’:
> > > > /home/ras/gnuradio/build/gr-  
> > > uhd/swig/uhd_swigPYTHON_wrap.cxx:29301:16:  
> > > > error: ‘class uhd::usrp::dboard_iface’ has no member named  
> > ‘set_gpio_debug’  
> > > > (*arg1)->set_gpio_debug(arg2,arg3);
> > > > ^
> > > > /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
> > > > In  
> > > function  
> > > > ‘void init_uhd_swig()’:
> > > > /home/ras/gnuradio/build/gr-  
> > > uhd/swig/uhd_swigPYTHON_wrap.cxx:49517:91:  
> > > > error: ‘ATR_REG_IDLE’ is not a member of
> > > > ‘uhd::usrp::dboard_iface’ ant(d,
> > > > "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int  
> > > >> (uhd::usrp::  
> > > > ^
> > > > /home/ras/gnuradio/build/gr-  
> > > uhd/swig/uhd_swigPYTHON_wrap.cxx:49518:94:  
> > > > error: ‘ATR_REG_TX_ONLY’ is not a member of
> > > > ‘uhd::usrp::dboard_iface’ (d,
> > > > "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int  
> > > >> (uhd::usrp::  
> > > > ^
> > > > /home/ras/gnuradio/build/gr-  
> > > uhd/swig/uhd_swigPYTHON_wrap.cxx:49519:94:  
> > > > error: ‘ATR_REG_RX_ONLY’ is not a member of
> > > > ‘uhd::usrp::dboard_iface’ (d,
> > > > "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int  
> > > >> (uhd::usrp::  
> > > > ^
> > > > /home/ras/gnuradio/build/gr-  
> > > uhd/swig/uhd_swigPYTHON_wrap.cxx:49520:98:  
> > > > error: ‘ATR_REG_FULL_DUPLEX’ is not a member of  
> > ‘uhd::usrp::dboard_iface’  
> > > > "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast<
> > > > int  
> > > >> (uhd::usrp::  
> > > > ^
> > > > gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:70: recipe for
> > > > target
> > > > 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o'  
> > failed  
> > > > make[2]: ***
> > > > [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o]  
> > Error  
> > > 1  
> > > > CMakeFiles/Makefile2:15016: recipe for target
> > > > 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed
> > > > make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2
> > > > Makefile:160: recipe for target 'all' failed
> > > >
> > > >
> > > >
> > > > --
> > > >
> > > > Ralph A. Schmid
> > > > Mondstr. 10
> > > > 90762 Fürth
> > > > +49-171-3631223
> > > > address@hidden
> > > > http://www.bclog.de/
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Discuss-gnuradio mailing list
> > > > address@hidden
> > > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> > > >  
> > 
> > 
> > 
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio  
>