Re: [Uisp-dev] Writing the fuse bits with avr910?

[Bernd Trog]

Theodore A. Roth <address@hidden> wrote:

> Can you run this again with -v=4 and post the output?

Sure:
uisp-20021201/src/uisp -v=4 -dprog=avr910 -dserial=/dev/ttyS2  -dpart=S8515
--rd_fuses
Transmit: { V [56] }
Receive: { 2 [32] 0 [30] }
Transmit: { v [76] }
Receive: { 1 [31] 0 [30] }
Programmer Information:
  Software Version: 2.0, Hardware Version: 1.0
Address Auto Increment Optimization Enabled
Transmit: { t [74] }
Receive: { . [12] }
Receive: { . [13] }
Receive: {   [20] }
Receive: { ( [28] }
Receive: { 8 [38] }
Receive: { H [48] }
Receive: { . [86] }
Receive: { . [00] }

Transmit: { T [54] 8 [38] }
Receive: { . [0d] }
Transmit: { P [50] }
Receive: { . [0d] }
Transmit: { s [73] }
Receive: { . [03] . [94] }
Receive: { . [1e] }
Vendor Code: 0x1e
Part Family: 0x94
Part Number: 0x03
Atmel AVR ATmega16 is found.
Page Write Enabled, size=128
FLASH Write Delay (t_wd_flash): 12500 us
EEPROM Write Delay (t_wd_eeprom): 25000 us

Transmit: { . [2e] P [50] . [00] . [00] . [00] }
Receive: { ? [3f] ? [3f] }
Device is not responding correctly.
Transmit: { L [4c] }
Receive: { ? [3f] }


Bernd

BTW, -v=4 is neither in the manual nor in the '-h' output...



__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/