[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Uisp-dev] added parallel mode programming with stk500 ,changes for
Theodore A. Roth
Re: [Uisp-dev] added parallel mode programming with stk500 ,changes for stk500 firmware 1.10
Mon, 19 Aug 2002 22:18:59 -0700 (PDT)
I just gave this patch a real look see. Looks like a pretty big change.
I'll don't have my hardware set up at home yet and don't want to change
the firmware in my stk500 at work. Give me some more time to get things up
at home and update the firmware in my personal stk500, then I can give the
patch some test time. I wish I had more devices to test with though. :-\
On Sun, 28 Jul 2002, Klaus Rudolph wrote:
>I have now updated the uisp for the new stk500 firmware version 1.10.
>Reading Writing Fuses/Locks now work with 1200 and mega128,
>no other devices for test here :-( need your help
>The stk500 uses new commands, there is no
>"universal" command at all, so all avr devices have to be reworked.
>Seems not to be a big problem, the first step is now done.
>For that reason there are some new AVR_ constants which enable
>the new functions, so each device can be switched on seperatly :-)
>Fix some time out, the default timeout is now 4 seconds not longer only
>1! Sometimes I got with 2 seconds also errors so i set it to 4.
>stk500 is now able to programm all devices in High Voltage Parallel Mode
>with uisp (-mode=p)
>Fix a bug which comes with reading fuses (xx_RD76) mode. There was
>a wrong bit compare in :-)
>Reading and Writing VTarget is now also available.
>Reading and Writing ARef too.
>A lot, because only Mega128 and 1200 tested and all other devices have
>to be reworked now. The calibration byte is allways read 0 but i have
>not looked for it now, (i dont need it :-)
>Theodore also want to hold the old firmware 1.7 alive. This patch only
>work with 1.10 and only devices mega128 & at90s1200 are ready to use.
>My work is really not finished yet, but I don´t want to loose all my
>changes if any one else make updates in uisp. So feel free
>to decide if you bring that patch in cvs or not :-)
>I am not member of uisp-dev mailing list, so please reply to
>my email adress, thanks.
>I hope my work helps a bit :-)
- Re: [Uisp-dev] added parallel mode programming with stk500 ,changes for stk500 firmware 1.10,
Theodore A. Roth <=