Re: [Swftools-common] Installation of swftools-2010-05-22-0954 onLinuxServer without Root

[Chris Pugh]

Das ist sehr gut! ;o)

Gruß Gott,


Chris.

PS Matthias, worth adding the lib/ruby directory to *0954?  ( and then
      uploading yet another snapshot?!! ) ;o)


2010/5/25 standardabweichung° | Daniel Kuhnlein
<address@hidden>:
> Yeah! Thank you very much for your guidance! Now everything works fine.
> Daniel
>
> -----Ursprüngliche Nachricht-----
> Von: Chris Pugh [mailto:address@hidden
> Gesendet: Dienstag, 25. Mai 2010 15:20
> An: address@hidden
> Cc: Swftools
> Betreff: Re: [Swftools-common] Installation of swftools-2010-05-22-0954
> onLinuxServer without Root
>
> Dan,
>
> For some reason your configure is bombing out because it can't
> locate the lib/ruby directory.  ( that directory simply isn't there
> in  *0954 ).  When I run configure here, it reports the directory
> as missing, but still completes.
>
> Can you get at the git version?  if so, copy the whole of the ruby
> module from that version, and try again.   Worth a shot.
>
> Regards,
>
>
> Chris.
>
> 2010/5/25 standardabweichung° | Daniel Kuhnlein
> <address@hidden>:
>> Ok, the output is the same as before.
>>
>> configure: creating ./config.status
>> config.status: creating Makefile.common
>> config.status: WARNING:  'Makefile.common.in' seems to ignore the
>> --datarootdir setting
>> config.status: creating Makefile
>> config.status: creating lib/Makefile
>> config.status: creating lib/action/Makefile
>> config.status: creating src/Makefile
>> config.status: creating lib/pdf/Makefile
>> config.status: creating swfs/Makefile
>> config.status: creating lib/python/Makefile
>> config.status: error: cannot find input file: lib/ruby/Makefile.in
>>
>> Schönen Gruß,
>> Daniel
>>
>> -----Ursprüngliche Nachricht-----
>> Von: Chris Pugh [mailto:address@hidden
>> Gesendet: Dienstag, 25. Mai 2010 14:27
>> An: address@hidden
>> Cc: Swftools
>> Betreff: Re: [Swftools-common] Installation of swftools-2010-05-22-0954
>> onLinuxServer without Root
>>
>> Guten Tag Daniel,
>>
>> OK. Process of elimination then..
>>
>> Do a..
>>
>>     make distclean,
>>
>> Run configure again.  Paste the last few lines in your message.
>>
>> Chris.
>>
>> 2010/5/25 standardabweichung° | Daniel Kuhnlein
>> <address@hidden>:y
>>> Hello Chris,
>>>
>>> thanks for your response. Here is the console Output:
>>>
>>> checking build system type... i686-pc-linux-gnu
>>> checking host system type... i686-pc-linux-gnu
>>> checking for gcc... gcc
>>> checking for C compiler default output file name... a.out
>>> checking whether the C compiler works... yes
>>> checking whether we are cross compiling... no
>>> checking for suffix of executables...
>>> checking for suffix of object files... o
>>> checking whether we are using the GNU C compiler... yes
>>> checking whether gcc accepts -g... yes
>>> checking for gcc option to accept ISO C89... none needed
>>> checking for g++... g++
>>> checking whether we are using the GNU C++ compiler... yes
>>> checking whether g++ accepts -g... yes
>>> checking whether gcc supports lazy variable declaration... yes
>>> checking how to run the C preprocessor... gcc -E
>>> checking for ranlib... ranlib
>>> checking whether make sets $(MAKE)... yes
>>> checking for a BSD-compatible install... /usr/bin/install -c
>>> checking whether ln -s works... yes
>>> checking for gzip... gzip
>>> checking host system type... (cached) i686-pc-linux-gnu
>>> checking for target system...
>>> checking for sin in -lm... yes
>>> checking for deflate in -lz... yes
>>> checking for PDF_open_file in -lpdf... yes
>>> checking for jpeg_write_raw_data in -ljpeg... yes
>>> checking for DGifOpen in -lungif... no
>>> checking for DGifOpen in -lgif... yes
>>> checking for zzip_file_open in -lzzip... yes
>>> checking for byte order... little endian
>>> checking whether system() can handle command substitution... yes
>>> checking for dirent.h that defines DIR... yes
>>> checking for library containing opendir... none required
>>> checking for grep that handles long lines and -e... /bin/grep
>>> checking for egrep... /bin/grep -E
>>> checking for ANSI C header files... yes
>>> checking for sys/types.h... yes
>>> checking for sys/stat.h... yes
>>> checking for stdlib.h... yes
>>> checking for string.h... yes
>>> checking for memory.h... yes
>>> checking for strings.h... yes
>>> checking for inttypes.h... yes
>>> checking for stdint.h... yes
>>> checking for unistd.h... yes
>>> checking zlib.h usability... yes
>>> checking zlib.h presence... yes
>>> checking for zlib.h... yes
>>> checking gif_lib.h usability... yes
>>> checking gif_lib.h presence... yes
>>> checking for gif_lib.h... yes
>>> checking io.h usability... no
>>> checking io.h presence... no
>>> checking for io.h... no
>>> checking wchar.h usability... yes
>>> checking wchar.h presence... yes
>>> checking for wchar.h... yes
>>> checking jpeglib.h usability... yes
>>> checking jpeglib.h presence... yes
>>> checking for jpeglib.h... yes
>>> checking assert.h usability... yes
>>> checking assert.h presence... yes
>>> checking for assert.h... yes
>>> checking signal.h usability... yes
>>> checking signal.h presence... yes
>>> checking for signal.h... yes
>>> checking pthread.h usability... yes
>>> checking pthread.h presence... yes
>>> checking for pthread.h... yes
>>> checking for sys/stat.h... (cached) yes
>>> checking sys/mman.h usability... yes
>>> checking sys/mman.h presence... yes
>>> checking for sys/mman.h... yes
>>> checking for sys/types.h... (cached) yes
>>> checking dirent.h usability... yes
>>> checking dirent.h presence... yes
>>> checking for dirent.h... yes
>>> checking sys/bsdtypes.h usability... no
>>> checking sys/bsdtypes.h presence... no
>>> checking for sys/bsdtypes.h... no
>>> checking sys/ndir.h usability... no
>>> checking sys/ndir.h presence... no
>>> checking for sys/ndir.h... no
>>> checking sys/dir.h usability... yes
>>> checking sys/dir.h presence... yes
>>> checking for sys/dir.h... yes
>>> checking ndir.h usability... no
>>> checking ndir.h presence... no
>>> checking for ndir.h... no
>>> checking time.h usability... yes
>>> checking time.h presence... yes
>>> checking for time.h... yes
>>> checking sys/time.h usability... yes
>>> checking sys/time.h presence... yes
>>> checking for sys/time.h... yes
>>> checking sys/resource.h usability... yes
>>> checking sys/resource.h presence... yes
>>> checking for sys/resource.h... yes
>>> checking pdflib.h usability... yes
>>> checking pdflib.h presence... yes
>>> checking for pdflib.h... yes
>>> checking zzip/lib.h usability... yes
>>> checking zzip/lib.h presence... yes
>>> checking for zzip/lib.h... yes
>>> checking for an ANSI C-conforming const... yes
>>> checking for inline... inline
>>> checking for off_t... yes
>>> checking for size_t... yes
>>> checking whether struct tm is in sys/time.h or time.h... time.h
>>> checking for boolean... no
>>> checking for popen... yes
>>> checking for wcschr... yes
>>> checking for wcsdup... yes
>>> checking for mkstemp... yes
>>> checking for stat... yes
>>> checking for mmap... yes
>>> checking for lrand48... yes
>>> checking for rand... yes
>>> checking for srand48... yes
>>> checking for srand... yes
>>> checking for bcopy... yes
>>> checking for bzero... yes
>>> checking for time... yes
>>> checking for getrusage... yes
>>> checking for mallinfo... yes
>>> checking for open64... yes
>>> checking for calloc... yes
>>> checking size of signed char... 1
>>> checking size of signed short... 2
>>> checking size of signed... 4
>>> checking size of signed long long... 8
>>> checking size of void*... 4
>>> checking for freetype-config... /usr/bin/freetype-config
>>> checking ft2build.h usability... yes
>>> checking ft2build.h presence... yes
>>> checking for ft2build.h... yes
>>> checking whether we can compile the freetype test program... yes
>>> checking for FcInit in -lfontconfig... yes
>>> checking fontconfig.h usability... yes
>>> checking fontconfig.h presence... yes
>>> checking for fontconfig.h... yes
>>> checking whether we can compile the fontconfig test program... yes
>>> checking for fftw_plan_dft_r2c_2d in -lfftw3... no
>>> checking fftw3.h usability... no
>>> checking fftw3.h presence... no
>>> checking for fftw3.h... no
>>> checking for lame_init in -lmp3lame... no
>>> checking lame.h usability... no
>>> checking lame.h presence... no
>>> checking for lame.h... no
>>> checking whether the filesystem normalizes file names... no
>>> checking for avifile-config... no
>>> checking whether we can compile the avifile test program... no
>>> checking for Python.h... 2.5
>>> checking whether we can compile the python test program... yes
>>> checking for Python-Imaging... no
>>> checking for ruby... /usr/bin/ruby
>>> checking for ruby's include directory... /usr/lib/ruby/1.8/i686-linux
>>> checking for ruby's cpp flags...  -D_FILE_OFFSET_BITS=64
>>> checking for ruby's ld flags... "-Wl,-R -Wl,/usr/lib -L/usr/lib -lruby18
>>> -shared"
>>> checking for ruby library name... ruby18
>>> checking ruby.h usability... yes
>>> checking ruby.h presence... yes
>>> checking for ruby.h... yes
>>> checking whether we should compile the ruby module... yes
>>> checking for missing libraries...
>>> configure: creating ./config.status
>>> config.status: creating Makefile.common
>>> config.status: WARNING:  'Makefile.common.in' seems to ignore the
>>> --datarootdir setting
>>> config.status: creating Makefile
>>> config.status: creating lib/Makefile
>>> config.status: creating lib/action/Makefile
>>> config.status: creating src/Makefile
>>> config.status: creating lib/pdf/Makefile
>>> config.status: creating swfs/Makefile
>>> config.status: creating lib/python/Makefile
>>> config.status: error: cannot find input file: lib/ruby/Makefile.in
>>>
>>> Daniel
>>>
>>>
>>> -----Ursprüngliche Nachricht-----
>>> Von: Chris Pugh [mailto:address@hidden
>>> Gesendet: Dienstag, 25. Mai 2010 13:57
>>> An: address@hidden
>>> Cc: address@hidden
>>> Betreff: Re: [Swftools-common] Installation of swftools-2010-05-22-0954
>>> onLinuxServer without Root
>>>
>>> 2010/5/24 standardabweichung° | Daniel Kuhnlein
>>> <address@hidden>:
>>>> Hello Matthias,
>>>>
>>>> i´ve checked this now with the latest developement snapshot and
>>>> its true. There´s no config.h but a config.h.in file.
>>>
>>> config.h is the last file created by configure,  i.e.
>>>
>>> ...
>>> ...
>>> checking for missing libraries...
>>> configure: creating ./config.status
>>> config.status: creating Makefile.common
>>> config.status: WARNING:  'Makefile.common.in' seems to ignore the
>>> --datarootdir setting
>>> config.status: creating Makefile
>>> config.status: creating lib/Makefile
>>> config.status: creating lib/action/Makefile
>>> config.status: creating src/Makefile
>>> config.status: creating lib/pdf/Makefile
>>> config.status: creating swfs/Makefile
>>> config.status: creating lib/python/Makefile
>>> config.status: creating lib/readers/Makefile
>>> config.status: creating config.h
>>>
>>> Where does your configure stop?
>>>
>>> Chris.
>>>
>>>
>>
>>
>
>