[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Simulavr-devel] ATMega128 Using Both USARTs
From: |
Joel Sherrill |
Subject: |
[Simulavr-devel] ATMega128 Using Both USARTs |
Date: |
Tue, 19 May 2009 14:45:10 -0500 |
User-agent: |
Thunderbird 2.0.0.21 (X11/20090320) |
Hi,
I have modified and committed the feedback
example to try to write to both usarts. It
appears there is an issue with this. Of
course, it could always be me. :(
I can't find a way to mix the output to the
two ports to vary this. Which ever port is
written first will only get a single character
and then all output will go to the other one.
From what I can read of a trace, it looks like
no other IRQs occur on the port which gets 1 character.
This can be duplicated after updating with "make do"
I wish I had an idea what to suspect but I don't.
How are these two separate USART instances related
to one another?
Any ideas where to poke?
--
Joel Sherrill, Ph.D. Director of Research & Development
address@hidden On-Line Applications Research
Ask me about RTEMS: a free RTOS Huntsville AL 35805
Support Available (256) 722-9985
- [Simulavr-devel] ATMega128 Using Both USARTs,
Joel Sherrill <=