[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support
From: |
Jonathan Cameron |
Subject: |
Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support. |
Date: |
Wed, 22 Feb 2023 14:53:30 +0000 |
On Tue, 21 Feb 2023 23:15:49 +0100
Philippe Mathieu-Daudé <philmd@linaro.org> wrote:
> Hi Jonathan,
>
> On 21/2/23 16:21, Jonathan Cameron wrote:
> > CXL uses PCI AER Internal errors to signal to the host that an error has
> > occurred. The host can then read more detailed status from the CXL RAS
> > capability.
> >
> > For uncorrectable errors: support multiple injection in one operation
> > as this is needed to reliably test multiple header logging support in an
> > OS. The equivalent feature doesn't exist for correctable errors, so only
> > one error need be injected at a time.
> >
> > Note:
> > - Header content needs to be manually specified in a fashion that
> > matches the specification for what can be in the header for each
> > error type.
> >
> > Injection via QMP:
> > { "execute": "qmp_capabilities" }
> > ...
> > { "execute": "cxl-inject-uncorrectable-errors",
> > "arguments": {
> > "path": "/machine/peripheral/cxl-pmem0",
> > "errors": [
> > {
> > "type": "cache-address-parity",
> > "header": [ 3, 4]
> > },
> > {
> > "type": "cache-data-parity",
> > "header":
> > [0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31]
> > },
> > {
> > "type": "internal",
> > "header": [ 1, 2, 4]
> > }
> > ]
> > }}
> > ...
> > { "execute": "cxl-inject-correctable-error",
> > "arguments": {
> > "path": "/machine/peripheral/cxl-pmem0",
> > "type": "physical"
> > } }
> >
> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Hi Philippe,
Thanks for your review. One question inline.
> > +#
> > +# Type of uncorrectable CXL error to inject. These errors are reported via
> > +# an AER uncorrectable internal error with additional information logged at
> > +# the CXL device.
> > +#
> > +# @cache-data-parity: Data error such as data parity or data ECC error
> > CXL.cache
> > +# @cache-address-parity: Address parity or other errors associated with the
> > +# address field on CXL.cache
> > +# @cache-be-parity: Byte enable parity or other byte enable errors on
> > CXL.cache
> > +# @cache-data-ecc: ECC error on CXL.cache
> > +# @mem-data-parity: Data error such as data parity or data ECC error on
> > CXL.mem
> > +# @mem-address-parity: Address parity or other errors associated with the
> > +# address field on CXL.mem
> > +# @mem-be-parity: Byte enable parity or other byte enable errors on
> > CXL.mem.
> > +# @mem-data-ecc: Data ECC error on CXL.mem.
> > +# @reinit-threshold: REINIT threshold hit.
> > +# @rsvd-encoding: Received unrecognized encoding.
> > +# @poison-received: Received poison from the peer.
> > +# @receiver-overflow: Buffer overflows (first 3 bits of header log
> > indicate which)
> > +# @internal: Component specific error
> > +# @cxl-ide-tx: Integrity and data encryption tx error.
> > +# @cxl-ide-rx: Integrity and data encryption rx error.
> > +##
> > +
> > +{ 'enum': 'CxlUncorErrorType',
>
> Doesn't these need
>
> 'if': 'CONFIG_CXL_MEM_DEVICE',
>
> ?
If I make this change I get a bunch of
./qapi/qapi-types-cxl.h:18:13: error: attempt to use poisoned
"CONFIG_CXL_MEM_DEVICE"
18 | #if defined(CONFIG_CXL_MEM_DEVICE)
It's a target specific define (I think) as built alongside PCI_EXPRESS
Only CXL_ACPI is specifically included by x86 and arm64 (out of tree)
To be honest though I don't fully understand the QEMU build system so the reason
for the error might be wrong.
>
> > + 'data': ['cache-data-parity',
> > + 'cache-address-parity',
> > + 'cache-be-parity',
> > + 'cache-data-ecc',
> > + 'mem-data-parity',
> > + 'mem-address-parity',
> > + 'mem-be-parity',
> > + 'mem-data-ecc',
> > + 'reinit-threshold',
> > + 'rsvd-encoding',
> > + 'poison-received',
> > + 'receiver-overflow',
> > + 'internal',
> > + 'cxl-ide-tx',
> > + 'cxl-ide-rx'
> > + ]
> > + }
- [PATCH v5 3/8] hw/pci-bridge/cxl_root_port: Wire up AER, (continued)
- [PATCH v5 3/8] hw/pci-bridge/cxl_root_port: Wire up AER, Jonathan Cameron, 2023/02/21
- [PATCH v5 4/8] hw/pci-bridge/cxl_root_port: Wire up MSI, Jonathan Cameron, 2023/02/21
- [PATCH v5 5/8] hw/mem/cxl-type3: Add AER extended capability, Jonathan Cameron, 2023/02/21
- [PATCH v5 6/8] hw/cxl: Fix endian issues in CXL RAS capability defaults / masks, Jonathan Cameron, 2023/02/21
- [PATCH v5 7/8] hw/pci/aer: Make PCIE AER error injection facility available for other emulation to use., Jonathan Cameron, 2023/02/21
- [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support., Jonathan Cameron, 2023/02/21
- Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support., Dave Jiang, 2023/02/21
- Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support., Philippe Mathieu-Daudé, 2023/02/21
- Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support.,
Jonathan Cameron <=
- Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support., Philippe Mathieu-Daudé, 2023/02/22
- Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support., Jonathan Cameron, 2023/02/22
- Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support., Philippe Mathieu-Daudé, 2023/02/22
- Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support., Thomas Huth, 2023/02/23
- Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support., Markus Armbruster, 2023/02/23
- Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support., Jonathan Cameron, 2023/02/23
- Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support., Jonathan Cameron, 2023/02/24
- Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support., Philippe Mathieu-Daudé, 2023/02/24
- Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support., Markus Armbruster, 2023/02/27
- Re: [PATCH v5 8/8] hw/mem/cxl_type3: Add CXL RAS Error Injection Support., Markus Armbruster, 2023/02/22