[PATCH v4] hw/arm/smmuv3: Add GBPA register

[Mostafa Saleh]

GBPA register can be used to globally abort all
transactions.

It is described in the SMMU manual in "6.3.14 SMMU_GBPA".
ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to
be zero(Do not abort incoming transactions).

Other fields have default values of Use Incoming.

If UPDATE is not set, the write is ignored. This is the only permitted
behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure)

As this patch adds a new state to the SMMU (GBPA), it is added
in a new subsection for forward migration compatibility.
GBPA is only migrated if its value is different from the reset value.
It does this to be backward migration compatible if SW didn't write
the register.

Signed-off-by: Mostafa Saleh <smostafa@google.com>
---
Changes in v4:
- Migrate if GBPA is different from reset value, not only ABORT bit.

Changes in v3:
- Remove migrate_gbpa property as it was unnecessary.

Changes in v2:
- GBPA is effective only when SMMU is not enabled.
- Ignore GBPA write when UPDATE is not set.
- Default value for SHCFG is "Use Incoming".
- Support migration.
---
 hw/arm/smmuv3-internal.h |  7 ++++++
 hw/arm/smmuv3.c          | 47 +++++++++++++++++++++++++++++++++++++++-
 include/hw/arm/smmuv3.h  |  1 +
 3 files changed, 54 insertions(+), 1 deletion(-)

diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h
index bce161870f..e8f0ebf25e 100644
--- a/hw/arm/smmuv3-internal.h
+++ b/hw/arm/smmuv3-internal.h
@@ -79,6 +79,13 @@ REG32(CR0ACK,              0x24)
 REG32(CR1,                 0x28)
 REG32(CR2,                 0x2c)
 REG32(STATUSR,             0x40)
+REG32(GBPA,                0x44)
+    FIELD(GBPA, ABORT,        20, 1)
+    FIELD(GBPA, UPDATE,       31, 1)
+
+/* Use incoming. */
+#define SMMU_GBPA_RESET_VAL 0x1000
+
 REG32(IRQ_CTRL,            0x50)
     FIELD(IRQ_CTRL, GERROR_IRQEN,        0, 1)
     FIELD(IRQ_CTRL, PRI_IRQEN,           1, 1)
diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c
index 955b89c8d5..ddd37f233b 100644
--- a/hw/arm/smmuv3.c
+++ b/hw/arm/smmuv3.c
@@ -285,6 +285,7 @@ static void smmuv3_init_regs(SMMUv3State *s)
     s->gerror = 0;
     s->gerrorn = 0;
     s->statusr = 0;
+    s->gbpa = SMMU_GBPA_RESET_VAL;
 }
 
 static int smmu_get_ste(SMMUv3State *s, dma_addr_t addr, STE *buf,
@@ -659,7 +660,11 @@ static IOMMUTLBEntry smmuv3_translate(IOMMUMemoryRegion 
*mr, hwaddr addr,
     qemu_mutex_lock(&s->mutex);
 
     if (!smmu_enabled(s)) {
-        status = SMMU_TRANS_DISABLE;
+        if (FIELD_EX32(s->gbpa, GBPA, ABORT)) {
+            status = SMMU_TRANS_ABORT;
+        } else {
+            status = SMMU_TRANS_DISABLE;
+        }
         goto epilogue;
     }
 
@@ -1170,6 +1175,16 @@ static MemTxResult smmu_writel(SMMUv3State *s, hwaddr 
offset,
     case A_GERROR_IRQ_CFG2:
         s->gerror_irq_cfg2 = data;
         return MEMTX_OK;
+    case A_GBPA:
+        /*
+         * If UPDATE is not set, the write is ignored. This is the only
+         * permitted behavior in SMMUv3.2 and later.
+         */
+        if (data & R_GBPA_UPDATE_MASK) {
+            /* Ignore update bit as write is synchronous. */
+            s->gbpa = data & ~R_GBPA_UPDATE_MASK;
+        }
+        return MEMTX_OK;
     case A_STRTAB_BASE: /* 64b */
         s->strtab_base = deposit64(s->strtab_base, 0, 32, data);
         return MEMTX_OK;
@@ -1318,6 +1333,9 @@ static MemTxResult smmu_readl(SMMUv3State *s, hwaddr 
offset,
     case A_STATUSR:
         *data = s->statusr;
         return MEMTX_OK;
+    case A_GBPA:
+        *data = s->gbpa;
+        return MEMTX_OK;
     case A_IRQ_CTRL:
     case A_IRQ_CTRL_ACK:
         *data = s->irq_ctrl;
@@ -1482,6 +1500,29 @@ static const VMStateDescription vmstate_smmuv3_queue = {
     },
 };
 
+static bool smmuv3_gbpa_needed(void *opaque)
+{
+    SMMUv3State *s = opaque;
+
+    /* Only migrate GBPA if it has different reset value. */
+    if (s->gbpa != SMMU_GBPA_RESET_VAL) {
+        return true;
+    }
+
+    return false;
+}
+
+static const VMStateDescription vmstate_gbpa = {
+    .name = "smmuv3/gbpa",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .needed = smmuv3_gbpa_needed,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(gbpa, SMMUv3State),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
 static const VMStateDescription vmstate_smmuv3 = {
     .name = "smmuv3",
     .version_id = 1,
@@ -1512,6 +1553,10 @@ static const VMStateDescription vmstate_smmuv3 = {
 
         VMSTATE_END_OF_LIST(),
     },
+    .subsections = (const VMStateDescription * []) {
+        &vmstate_gbpa,
+        NULL
+    }
 };
 
 static void smmuv3_instance_init(Object *obj)
diff --git a/include/hw/arm/smmuv3.h b/include/hw/arm/smmuv3.h
index f1921fdf9e..9899fa1860 100644
--- a/include/hw/arm/smmuv3.h
+++ b/include/hw/arm/smmuv3.h
@@ -46,6 +46,7 @@ struct SMMUv3State {
     uint32_t cr[3];
     uint32_t cr0ack;
     uint32_t statusr;
+    uint32_t gbpa;
     uint32_t irq_ctrl;
     uint32_t gerror;
     uint32_t gerrorn;
-- 
2.39.1.581.gbfd45094c4-goog