[PULL 00/88] riscv-to-apply queue

[Alistair Francis]

From: Alistair Francis <alistair.francis@wdc.com>

The following changes since commit 212a33d3b0c65ae2583bb1d06cb140cd0890894c:

  Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging 
(2021-12-19 16:36:10 -0800)

are available in the Git repository at:

  git@github.com:alistair23/qemu.git tags/pull-riscv-to-apply-20211220-1

for you to fetch changes up to 7e322a7f23a60b0e181b55ef722fdf390ec4e463:

  hw/riscv: Use load address rather than entry point for fw_dynamic next_addr 
(2021-12-20 14:53:31 +1000)

----------------------------------------------------------------
First RISC-V PR for QEMU 7.0

 - Add support for ratified 1.0 Vector extension
 - Drop support for draft 0.7.1 Vector extension
 - Support Zfhmin and Zfh extensions
 - Improve kernel loading for non-Linux platforms

----------------------------------------------------------------
Frank Chang (75):
      target/riscv: zfh: add Zfh cpu property
      target/riscv: zfh: implement zfhmin extension
      target/riscv: zfh: add Zfhmin cpu property
      target/riscv: drop vector 0.7.1 and add 1.0 support
      target/riscv: Use FIELD_EX32() to extract wd field
      target/riscv: rvv-1.0: set mstatus.SD bit if mstatus.VS is dirty
      target/riscv: rvv-1.0: introduce writable misa.v field
      target/riscv: rvv-1.0: add translation-time vector context status
      target/riscv: rvv-1.0: remove rvv related codes from fcsr registers
      target/riscv: rvv-1.0: check MSTATUS_VS when accessing vector csr 
registers
      target/riscv: rvv-1.0: remove MLEN calculations
      target/riscv: rvv-1.0: add fractional LMUL
      target/riscv: rvv-1.0: add VMA and VTA
      target/riscv: rvv-1.0: update check functions
      target/riscv: introduce more imm value modes in translator functions
      target/riscv: rvv:1.0: add translation-time nan-box helper function
      target/riscv: rvv-1.0: remove amo operations instructions
      target/riscv: rvv-1.0: configure instructions
      target/riscv: rvv-1.0: stride load and store instructions
      target/riscv: rvv-1.0: index load and store instructions
      target/riscv: rvv-1.0: fix address index overflow bug of indexed 
load/store insns
      target/riscv: rvv-1.0: fault-only-first unit stride load
      target/riscv: rvv-1.0: load/store whole register instructions
      target/riscv: rvv-1.0: update vext_max_elems() for load/store insns
      target/riscv: rvv-1.0: take fractional LMUL into vector max elements 
calculation
      target/riscv: rvv-1.0: floating-point square-root instruction
      target/riscv: rvv-1.0: floating-point classify instructions
      target/riscv: rvv-1.0: count population in mask instruction
      target/riscv: rvv-1.0: find-first-set mask bit instruction
      target/riscv: rvv-1.0: set-X-first mask bit instructions
      target/riscv: rvv-1.0: iota instruction
      target/riscv: rvv-1.0: element index instruction
      target/riscv: rvv-1.0: allow load element with sign-extended
      target/riscv: rvv-1.0: register gather instructions
      target/riscv: rvv-1.0: integer scalar move instructions
      target/riscv: rvv-1.0: floating-point move instruction
      target/riscv: rvv-1.0: floating-point scalar move instructions
      target/riscv: rvv-1.0: whole register move instructions
      target/riscv: rvv-1.0: integer extension instructions
      target/riscv: rvv-1.0: single-width averaging add and subtract 
instructions
      target/riscv: rvv-1.0: single-width bit shift instructions
      target/riscv: rvv-1.0: integer add-with-carry/subtract-with-borrow
      target/riscv: rvv-1.0: narrowing integer right shift instructions
      target/riscv: rvv-1.0: widening integer multiply-add instructions
      target/riscv: rvv-1.0: single-width saturating add and subtract 
instructions
      target/riscv: rvv-1.0: integer comparison instructions
      target/riscv: rvv-1.0: floating-point compare instructions
      target/riscv: rvv-1.0: mask-register logical instructions
      target/riscv: rvv-1.0: slide instructions
      target/riscv: rvv-1.0: floating-point slide instructions
      target/riscv: rvv-1.0: narrowing fixed-point clip instructions
      target/riscv: rvv-1.0: single-width floating-point reduction
      target/riscv: rvv-1.0: widening floating-point reduction instructions
      target/riscv: rvv-1.0: single-width scaling shift instructions
      target/riscv: rvv-1.0: remove widening saturating scaled multiply-add
      target/riscv: rvv-1.0: remove vmford.vv and vmford.vf
      target/riscv: rvv-1.0: remove integer extract instruction
      target/riscv: rvv-1.0: floating-point min/max instructions
      target/riscv: introduce floating-point rounding mode enum
      target/riscv: rvv-1.0: floating-point/integer type-convert instructions
      target/riscv: rvv-1.0: widening floating-point/integer type-convert
      target/riscv: add "set round to odd" rounding mode helper function
      target/riscv: rvv-1.0: narrowing floating-point/integer type-convert
      target/riscv: rvv-1.0: relax RV_VLEN_MAX to 1024-bits
      target/riscv: rvv-1.0: implement vstart CSR
      target/riscv: rvv-1.0: trigger illegal instruction exception if frm is 
not valid
      target/riscv: rvv-1.0: floating-point reciprocal square-root estimate 
instruction
      target/riscv: rvv-1.0: floating-point reciprocal estimate instruction
      target/riscv: rvv-1.0: rename r2_zimm to r2_zimm11
      target/riscv: rvv-1.0: add vsetivli instruction
      target/riscv: rvv-1.0: add evl parameter to vext_ldst_us()
      target/riscv: rvv-1.0: add vector unit-stride mask load/store insns
      target/riscv: rvv-1.0: rename vmandnot.mm and vmornot.mm to vmandn.mm and 
vmorn.mm
      target/riscv: rvv-1.0: update opivv_vadc_check() comment
      target/riscv: rvv-1.0: Add ELEN checks for widening and narrowing 
instructions

Greentime Hu (1):
      target/riscv: rvv-1.0: add vlenb register

Hsiangkai Wang (1):
      target/riscv: gdb: support vector registers for rv64 & rv32

Jessica Clarke (1):
      hw/riscv: Use load address rather than entry point for fw_dynamic 
next_addr

Khem Raj (1):
      riscv: Set 5.4 as minimum kernel version for riscv32

Kito Cheng (5):
      target/riscv: zfh: half-precision load and store
      target/riscv: zfh: half-precision computational
      target/riscv: zfh: half-precision convert and move
      target/riscv: zfh: half-precision floating-point compare
      target/riscv: zfh: half-precision floating-point classify

LIU Zhiwei (3):
      target/riscv: rvv-1.0: add mstatus VS field
      target/riscv: rvv-1.0: add sstatus VS field
      target/riscv: rvv-1.0: add vcsr register

Vineet Gupta (1):
      target/riscv: Enable bitmanip Zb[abcs] instructions

 linux-user/riscv/target_syscall.h         |    3 +-
 target/riscv/cpu.h                        |   63 +-
 target/riscv/cpu_bits.h                   |   10 +
 target/riscv/helper.h                     |  464 ++--
 target/riscv/internals.h                  |   40 +-
 target/riscv/insn32.decode                |  332 +--
 hw/riscv/boot.c                           |   13 +-
 target/riscv/cpu.c                        |   28 +-
 target/riscv/cpu_helper.c                 |   39 +-
 target/riscv/csr.c                        |   63 +-
 target/riscv/fpu_helper.c                 |  197 +-
 target/riscv/gdbstub.c                    |  184 ++
 target/riscv/translate.c                  |   93 +-
 target/riscv/vector_helper.c              | 3601 +++++++++++++++--------------
 target/riscv/insn_trans/trans_rvv.c.inc   | 2429 ++++++++++++-------
 target/riscv/insn_trans/trans_rvzfh.c.inc |  537 +++++
 16 files changed, 4997 insertions(+), 3099 deletions(-)
 create mode 100644 target/riscv/insn_trans/trans_rvzfh.c.inc