[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[RFC v9 30/50] target/arm: remove broad "else" statements when checking
From: |
Claudio Fontana |
Subject: |
[RFC v9 30/50] target/arm: remove broad "else" statements when checking accels |
Date: |
Wed, 17 Mar 2021 19:29:53 +0100 |
There might be more than just KVM and TCG in the future,
so where appropriate, replace broad "else" statements
with the appropriate if (accel_enabled()) check.
Also invert some checks for !kvm_enabled() or !tcg_enabled()
where it seems appropriate to do so.
Note that to make qtest happy we need to perform gpio
initialization in the qtest_enabled() case as well.
Hopefully we do not break any Xen stuff.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Cc: Julien Grall <jgrall@amazon.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Olaf Hering <olaf@aepfle.de>
Cc: Olaf Hering <OHering@suse.com>
---
target/arm/cpu.c | 10 ++++++----
target/arm/cpu64.c | 13 +++++++++----
target/arm/machine.c | 19 ++++++-------------
3 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 3491e615c3..31f1b3df09 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -37,6 +37,7 @@
#endif
#include "sysemu/tcg.h"
+#include "sysemu/qtest.h"
#include "kvm/kvm_arm.h"
#include "disas/capstone.h"
#include "fpu/softfloat.h"
@@ -564,7 +565,8 @@ static void arm_cpu_initfn(Object *obj)
* the same interface as non-KVM CPUs.
*/
qdev_init_gpio_in(DEVICE(cpu), arm_cpu_kvm_set_irq, 4);
- } else {
+ }
+ if (tcg_enabled() || qtest_enabled()) {
qdev_init_gpio_in(DEVICE(cpu), arm_cpu_set_irq, 4);
}
@@ -741,14 +743,14 @@ void arm_cpu_post_init(Object *obj)
? cpu_isar_feature(aa64_fp_simd, cpu)
: cpu_isar_feature(aa32_vfp, cpu)) {
cpu->has_vfp = true;
- if (!kvm_enabled()) {
+ if (tcg_enabled()) {
qdev_property_add_static(DEVICE(obj), &arm_cpu_has_vfp_property);
}
}
if (arm_feature(&cpu->env, ARM_FEATURE_NEON)) {
cpu->has_neon = true;
- if (!kvm_enabled()) {
+ if (tcg_enabled()) {
qdev_property_add_static(DEVICE(obj), &arm_cpu_has_neon_property);
}
}
@@ -849,7 +851,7 @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp)
* We have not registered the cpu properties when KVM
* is in use, so the user will not be able to set them.
*/
- if (!kvm_enabled()) {
+ if (tcg_enabled()) {
arm_cpu_pauth_finalize(cpu, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index b3475a93cc..e0cdcc6465 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -23,6 +23,7 @@
#include "qemu/qemu-print.h"
#include "cpu.h"
#include "qemu/module.h"
+#include "sysemu/tcg.h"
#include "sysemu/kvm.h"
#include "kvm/kvm_arm.h"
#include "qapi/visitor.h"
@@ -296,7 +297,8 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
*/
bitmap_andnot(tmp, kvm_supported, cpu->sve_vq_init, max_vq);
bitmap_or(cpu->sve_vq_map, cpu->sve_vq_map, tmp, max_vq);
- } else {
+ }
+ if (tcg_enabled()) {
/* Propagate enabled bits down through required powers-of-two. */
for (vq = pow2floor(max_vq); vq >= 1; vq >>= 1) {
if (!test_bit(vq - 1, cpu->sve_vq_init)) {
@@ -333,7 +335,8 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
"vector length must be enabled.\n");
return;
}
- } else {
+ }
+ if (tcg_enabled()) {
/* Disabling a power-of-two disables all larger lengths. */
if (test_bit(0, cpu->sve_vq_init)) {
error_setg(errp, "cannot disable sve128");
@@ -415,7 +418,8 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
}
return;
}
- } else {
+ }
+ if (tcg_enabled()) {
/* Ensure all required powers-of-two are enabled. */
for (vq = pow2floor(max_vq); vq >= 1; vq >>= 1) {
if (!test_bit(vq - 1, cpu->sve_vq_map)) {
@@ -609,7 +613,8 @@ static void aarch64_max_initfn(Object *obj)
if (kvm_enabled()) {
kvm_arm_set_cpu_features_from_host(cpu);
- } else {
+ }
+ if (tcg_enabled()) {
uint64_t t;
uint32_t u;
aarch64_a57_initfn(obj);
diff --git a/target/arm/machine.c b/target/arm/machine.c
index 595ab94237..cfc2bb4982 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -638,24 +638,21 @@ static int cpu_pre_save(void *opaque)
if (tcg_enabled()) {
pmu_op_start(&cpu->env);
+ if (!write_cpustate_to_list(cpu, false)) {
+ /* This should never fail. */
+ abort();
+ }
}
-
if (kvm_enabled()) {
if (!write_kvmstate_to_list(cpu)) {
/* This should never fail */
abort();
}
-
/*
* kvm_arm_cpu_pre_save() must be called after
* write_kvmstate_to_list()
*/
kvm_arm_cpu_pre_save(cpu);
- } else {
- if (!write_cpustate_to_list(cpu, false)) {
- /* This should never fail. */
- abort();
- }
}
cpu->cpreg_vmstate_array_len = cpu->cpreg_array_len;
@@ -754,20 +751,16 @@ static int cpu_post_load(void *opaque, int version_id)
*/
write_list_to_cpustate(cpu);
kvm_arm_cpu_post_load(cpu);
- } else {
+ }
+ if (tcg_enabled()) {
if (!write_list_to_cpustate(cpu)) {
return -1;
}
- }
-
- if (tcg_enabled()) {
hw_breakpoint_update_all(cpu);
hw_watchpoint_update_all(cpu);
-
pmu_op_finish(&cpu->env);
arm_rebuild_hflags(&cpu->env);
}
-
return 0;
}
--
2.26.2
- [RFC v9 27/50] target/arm: remove kvm include file for PSCI and arm-powerctl, (continued)
- [RFC v9 27/50] target/arm: remove kvm include file for PSCI and arm-powerctl, Claudio Fontana, 2021/03/17
- [RFC v9 32/50] tests: restrict TCG-only arm-cpu-features tests to TCG builds, Claudio Fontana, 2021/03/17
- [RFC v9 35/50] tests: do not run qom-test on all machines for ARM KVM-only, Claudio Fontana, 2021/03/17
- [RFC v9 38/50] target/arm: move kvm cpu properties setting to kvm-cpu, Claudio Fontana, 2021/03/17
- [RFC v9 43/50] target/arm: cpu-sve: new module, Claudio Fontana, 2021/03/17
- [RFC v9 26/50] target/arm: wrap call to aarch64_sve_change_el in tcg_enabled(), Claudio Fontana, 2021/03/17
- [RFC v9 23/50] target/arm: move sve_exception_el out of TCG helpers, Claudio Fontana, 2021/03/17
- [RFC v9 25/50] target/arm: cpu: fix style, Claudio Fontana, 2021/03/17
- [RFC v9 29/50] target/arm: cleanup cpu includes, Claudio Fontana, 2021/03/17
- [RFC v9 33/50] tests: do not run test-hmp on all machines for ARM KVM-only, Claudio Fontana, 2021/03/17
- [RFC v9 30/50] target/arm: remove broad "else" statements when checking accels,
Claudio Fontana <=
- [RFC v9 34/50] tests: device-introspect-test: cope with ARM TCG-only devices, Claudio Fontana, 2021/03/17
- [RFC v9 22/50] target/arm: split a15 cpu model and 32bit class functions to cpu32.c, Claudio Fontana, 2021/03/17
- [RFC v9 09/50] target/arm: split cpregs from tcg/helper.c, Claudio Fontana, 2021/03/17
- [RFC v9 31/50] tests/qtest: skip bios-tables-test test_acpi_oem_fields_virt for KVM, Claudio Fontana, 2021/03/17
- [RFC v9 28/50] target/arm: move kvm-const.h, kvm.c, kvm64.c, kvm_arm.h to kvm/, Claudio Fontana, 2021/03/17
- [RFC v9 37/50] target/arm: create kvm cpu accel class, Claudio Fontana, 2021/03/17
- [RFC v9 36/50] Revert "target/arm: Restrict v8M IDAU to TCG", Claudio Fontana, 2021/03/17
- [RFC v9 41/50] target/arm: add tcg cpu accel class, Claudio Fontana, 2021/03/17
- [RFC v9 44/50] target/arm: cpu-sve: split TCG and KVM functionality, Claudio Fontana, 2021/03/17
- [RFC v9 40/50] accel: add double dispatch mechanism for class initialization, Claudio Fontana, 2021/03/17