[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2 1/3] hw/usb: Add basic i.MX USB Phy support
From: |
Peter Maydell |
Subject: |
Re: [PATCH v2 1/3] hw/usb: Add basic i.MX USB Phy support |
Date: |
Thu, 12 Mar 2020 13:16:01 +0000 |
On Tue, 10 Mar 2020 at 21:04, Guenter Roeck <address@hidden> wrote:
>
> Add basic USB PHY support as implemented in i.MX23, i.MX28, i.MX6,
> and i.MX7 SoCs.
>
> The only support really needed - at least to boot Linux - is support
> for soft reset, which needs to reset various registers to their initial
> value. Otherwise, just record register values.
>
> Signed-off-by: Guenter Roeck <address@hidden>
> ---
> v2: New patch, replacing dummy STMP register support with basic USB PHY
> emulation.
>
> hw/arm/Kconfig | 1 +
> hw/usb/Kconfig | 5 +
> hw/usb/Makefile.objs | 2 +
> hw/usb/imx-usb-phy.c | 225 +++++++++++++++++++++++++++++++++++
> include/hw/usb/imx-usb-phy.h | 53 +++++++++
> 5 files changed, 286 insertions(+)
> create mode 100644 hw/usb/imx-usb-phy.c
> create mode 100644 include/hw/usb/imx-usb-phy.h
> + /*
> + * All REG_NAME_SET register access are in fact targeting the
> + * the REG_NAME register.
> + */
All these comments have a duplicate word: "the the".
You should add the new files to MAINTAINERS:
diff --git a/MAINTAINERS b/MAINTAINERS
index 857f969aa1f..4e42187aafb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -748,6 +748,8 @@ F: hw/arm/sabrelite.c
F: hw/arm/fsl-imx6.c
F: hw/misc/imx6_*.c
F: hw/ssi/imx_spi.c
+F: hw/usb/imx-usb-phy.c
+F: include/hw/usb/imx-usb-phy.h
F: include/hw/arm/fsl-imx6.h
F: include/hw/misc/imx6_*.h
F: include/hw/ssi/imx_spi.h
Otherwise
Reviewed-by: Peter Maydell <address@hidden>
thanks
-- PMM