[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v1 05/10] target-arm: Add VTTBR_EL2
From: |
Edgar E. Iglesias |
Subject: |
Re: [Qemu-devel] [PATCH v1 05/10] target-arm: Add VTTBR_EL2 |
Date: |
Tue, 8 Sep 2015 20:14:37 +0200 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Tue, Sep 08, 2015 at 03:27:05PM +0100, Peter Maydell wrote:
> On 3 September 2015 at 21:14, Edgar E. Iglesias
> <address@hidden> wrote:
> > From: "Edgar E. Iglesias" <address@hidden>
> >
> > Signed-off-by: Edgar E. Iglesias <address@hidden>
> > ---
> > target-arm/cpu.h | 1 +
> > target-arm/helper.c | 34 ++++++++++++++++++++++++++++++++--
> > 2 files changed, 33 insertions(+), 2 deletions(-)
> >
> > diff --git a/target-arm/cpu.h b/target-arm/cpu.h
> > index ba22e12..0ebdaf7 100644
> > --- a/target-arm/cpu.h
> > +++ b/target-arm/cpu.h
> > @@ -221,6 +221,7 @@ typedef struct CPUARMState {
> > };
> > uint64_t ttbr1_el[4];
> > };
> > + uint64_t vttbr_el2; /* Virtualization Translation Table Base. */
> > /* MMU translation table base control. */
> > TCR tcr_el[4];
> > TCR vtcr_el2; /* Virtualization Translation Control. */
> > diff --git a/target-arm/helper.c b/target-arm/helper.c
> > index c82aa1d..ec19e68 100644
> > --- a/target-arm/helper.c
> > +++ b/target-arm/helper.c
> > @@ -2200,6 +2200,19 @@ static void vmsa_ttbr_write(CPUARMState *env, const
> > ARMCPRegInfo *ri,
> > raw_write(env, ri, value);
> > }
> >
> > +static void vttbr_write(CPUARMState *env, const ARMCPRegInfo *ri,
> > + uint64_t value)
> > +{
> > + ARMCPU *cpu = arm_env_get_cpu(env);
> > + CPUState *cs = CPU(cpu);
> > +
> > + if (raw_read(env, ri) != value) {
> > + tlb_flush_by_mmuidx(cs, ARMMMUIdx_S12NSE1, ARMMMUIdx_S12NSE0,
> > + ARMMMUIdx_S2NS, -1);
>
> We only need the TLB flush because this could change the VMID and
> our TLB doesn't handle VMIDs, right? That could use a comment
> (compare the remark about ASIDs in vmsa_ttbr_write()).
Yes, will add a comment.
>
> > + raw_write(env, ri, value);
> > + }
> > +}
> > +
> > static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = {
> > { .name = "DFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0,
> > .access = PL1_RW, .type = ARM_CP_ALIAS,
> > @@ -3131,6 +3144,14 @@ static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = {
> > .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2,
> > .access = PL2_RW, .accessfn = access_el3_aa32ns_aa64any,
> > .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore },
> > + { .name = "VTTBR", .state = ARM_CP_STATE_AA32, .type = ARM_CP_64BIT,
> > + .cp = 15, .opc1 = 6, .crm = 2,
> > + .access = PL2_RW, .accessfn = access_el3_aa32ns_aa64any,
> > + .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore },
> > + { .name = "VTTBR_EL2", .state = ARM_CP_STATE_AA64,
> > + .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 0,
> > + .access = PL2_RW, .accessfn = access_el3_aa32ns_aa64any,
> > + .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore },
>
> RAZ/WI registers not using ARM_CP_CONST again...
Thanks, will fix!
Cheers,
Edgar
>
> > { .name = "SCTLR_EL2", .state = ARM_CP_STATE_BOTH,
> > .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 0,
> > .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
> > @@ -3271,6 +3292,16 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
> > .writefn = vmsa_tcr_el1_write,
> > .resetfn = vmsa_ttbcr_reset, .raw_writefn = raw_write,
> > .fieldoffset = offsetof(CPUARMState, cp15.vtcr_el2) },
> > + { .name = "VTTBR", .state = ARM_CP_STATE_AA32, .type = ARM_CP_64BIT,
> > + .cp = 15, .opc1 = 6, .crm = 2,
> > + .access = PL2_RW, .accessfn = access_el3_aa32ns_aa64any,
> > + .fieldoffset = offsetof(CPUARMState, cp15.vttbr_el2),
> > + .writefn = vttbr_write },
> > + { .name = "VTTBR_EL2", .state = ARM_CP_STATE_AA64,
> > + .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 0,
> > + .access = PL2_RW, .accessfn = access_el3_aa32ns_aa64any,
> > + .fieldoffset = offsetof(CPUARMState, cp15.vttbr_el2),
> > + .writefn = vttbr_write },
> > { .name = "SCTLR_EL2", .state = ARM_CP_STATE_BOTH,
> > .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 0,
> > .access = PL2_RW, .raw_writefn = raw_write, .writefn = sctlr_write,
> > @@ -5770,8 +5801,7 @@ static inline uint64_t regime_ttbr(CPUARMState *env,
> > ARMMMUIdx mmu_idx,
> > int ttbrn)
> > {
> > if (mmu_idx == ARMMMUIdx_S2NS) {
> > - /* TODO: return VTTBR_EL2 */
> > - g_assert_not_reached();
> > + return env->cp15.vttbr_el2;
> > }
> > if (ttbrn == 0) {
> > return env->cp15.ttbr0_el[regime_el(env, mmu_idx)];
> > --
> > 1.9.1
> >
>
> thanks
> -- PMM
- Re: [Qemu-devel] [PATCH v1 01/10] target-arm: Log the target EL when taking exceptions, (continued)
- [Qemu-devel] [PATCH v1 02/10] target-arm: Correct opc1 for AT_S12Exx, Edgar E. Iglesias, 2015/09/03
- [Qemu-devel] [PATCH v1 03/10] target-arm: Add AArch64 access to PAR_EL1, Edgar E. Iglesias, 2015/09/03
- [Qemu-devel] [PATCH v1 04/10] target-arm: Add VTCR_EL2, Edgar E. Iglesias, 2015/09/03
- [Qemu-devel] [PATCH v1 05/10] target-arm: Add VTTBR_EL2, Edgar E. Iglesias, 2015/09/03
- [Qemu-devel] [PATCH v1 06/10] target-arm: Supress TBI for S2 translations, Edgar E. Iglesias, 2015/09/03
- [Qemu-devel] [PATCH v1 07/10] target-arm: Supress the use of TTBR1 for S2 translations, Edgar E. Iglesias, 2015/09/03
[Qemu-devel] [PATCH v1 08/10] target-arm: Supress EPD for S2, EL2 and EL3 translations, Edgar E. Iglesias, 2015/09/03
[Qemu-devel] [PATCH v1 09/10] target-arm: Add VPIDR_EL2, Edgar E. Iglesias, 2015/09/03