[Protux-devel] hi all

[Ryan Gallagher]

Howdy,

I'm new to the list so please forgive me if this is a
mis-post or frequently asked question.  When
attempting to playback audio, no sound comes.

*** Error in int Mixer::go(long long int)
None of required playback bus could be open. Try
changing bust out on the tracks, please

Here's what happens when protux starts up.

[ Added property DSP_DEVICE = hw  ]
LEAVING GlobalProperties.cc::init
ENTERING MustuxAudioDeviceMapper.cc::init
[ Found ALSA supported Card : ICE1712 - M Audio Delta
66 ]
[ Found ALSA supported Card : USB-Audio - Keystation ]
[ PLABACK Bus 0 [ card 0 ] : "ICE1712 - 1st OUT
(hw:0,0)" created ]
[ CAPTURE Bus 0 [ card 0 ] : "ICE1712 - 1st IN
(hw:0,0)" created ]
[ Probing CAPTURE Buses
------------------------------------------------ ]
[ Probing valid modes for bus  0:0 ... ]
[ Trying 22050 Hz 1 channels 16 bits ...    LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 22050 Hz 2 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 44100 Hz 1 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 44100 Hz 2 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 44100 Hz 1 channels 24 bits ... FAILED :  ]
[ Trying 44100 Hz 2 channels 24 bits ... FAILED :  ]
[ Trying 48000 Hz 1 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 48000 Hz 2 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 48000 Hz 1 channels 24 bits ... FAILED :  ]
[ Trying 48000 Hz 2 channels 24 bits ... FAILED :  ]
[ Trying 96000 Hz 1 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 96000 Hz 2 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 96000 Hz 1 channels 24 bits ... FAILED :  ]
[ Trying 96000 Hz 2 channels 24 bits ... FAILED :  ]
[ Probing PLAYBACK Buses
------------------------------------------------ ]
[ Probing valid modes for bus  0:0 ... ]
[ Trying 22050 Hz 1 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 22050 Hz 2 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 44100 Hz 1 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 44100 Hz 2 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 44100 Hz 1 channels 24 bits ... FAILED :  ]
[ Trying 44100 Hz 2 channels 24 bits ... FAILED :  ]
[ Trying 48000 Hz 1 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 48000 Hz 2 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 48000 Hz 1 channels 24 bits ... FAILED :  ]
[ Trying 48000 Hz 2 channels 24 bits ... FAILED :  ]
[ Trying 96000 Hz 1 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 96000 Hz 2 channels 16 bits ...LEAVING
MustuxAudioDeviceMapper.cc::supports
 FAILED :  ]
[ Trying 96000 Hz 1 channels 24 bits ... FAILED :  ]
[ Trying 96000 Hz 2 channels 24 bits ... FAILED :  ]

I know that hw:0.0 doesn't work for me (not even with
jackd) but hw does.  In my .protuxrc I put ->
DSP_DEVICE=hw

I'm using CVS from 2-15-03 Any thoughts?

Thanks a ton,
-ryan

=====
--r--

__________________________________________________
Do you Yahoo!?
Yahoo! Shopping - Send Flowers for Valentine's Day
http://shopping.yahoo.com