[Paparazzi-devel] Trouble getting started with paparazzi, error message: ** (gcs:2003): CRITICAL **: murrine_style_draw_box: assertion `width >= -1' failed

[Jorn Anke]

Hi all,

I am new to paparazzi (my first post to the mailing list). I have just re-installed paparazzi (and Ubuntu) for the 5th or 6th time, on two different laptops, using both the synaptic installation method and manual installation. I am running Ubuntu 11.04 32bit and have been following the instructions on the http://paparazzi.enac.fr/wiki/Installation#Downloading_the_Source_Code as closely as possible. Each time when I executed the simulation step (using the recommended Microjet), the plane appears to launch ok, but then falls to the ground, and there is a error message(?):  ** (gcs:2003): CRITICAL **: murrine_style_draw_box: assertion `width >= -1' failed

The numbers in (gcs:####) are different most of the time.
 
Anyone who can tell what I am doing wrong?


Thanks,

Jorn

---------- Copy / paste from the Paparazzi Center

Run 'make -C /home/jorn/paparazzi -f Makefile.ac AIRCRAFT=Microjet sim '
make: Entering directory `/home/jorn/paparazzi'
Microjet
BUILD Microjet, TARGET sim
make[1]: Entering directory `/home/jorn/paparazzi'
BUILD /home/jorn/paparazzi/var/Microjet/generated/airframe.h
##################################################

 AIRFRAME MODEL: Microjet

##################################################
BUILD /home/jorn/paparazzi/var/Microjet/generated/settings.h
BUILD /home/jorn/paparazzi/var/Microjet/generated/tuning.h
BUILD /home/jorn/paparazzi/var/Microjet/generated/periodic.h
make[1]: Leaving directory `/home/jorn/paparazzi'
make[1]: Entering directory `/home/jorn/paparazzi'
BUILD /home/jorn/paparazzi/var/Microjet/generated/radio.h
##################################################

 RADIO MODEL: cockpitMM

##################################################
make[1]: Leaving directory `/home/jorn/paparazzi'
make[1]: Entering directory `/home/jorn/paparazzi'
BUILD /home/jorn/paparazzi/var/Microjet/generated/flight_plan.h
##################################################

 FLIGHT PLAN: Basic

##################################################

Warning: low altitude (0<0+25) in <waypoint NAME="TD" Y="57.0" X="28.8" ALT="0.0"/>

BUILD /home/jorn/paparazzi/var/Microjet/flight_plan.xml
make[1]: Leaving directory `/home/jorn/paparazzi'
cd sw/airborne; make PAPARAZZI_SRC=/home/jorn/paparazzi PAPARAZZI_HOME=/home/jorn/paparazzi TARGET=sim ARCHI=sim ARCH=sim all
make[1]: Entering directory `/home/jorn/paparazzi/sw/airborne'
CC /home/jorn/paparazzi/var/Microjet/sim/downlink.o
LD /home/jorn/paparazzi/var/Microjet/sim/simsitl
make[1]: Leaving directory `/home/jorn/paparazzi/sw/airborne'
make: Leaving directory `/home/jorn/paparazzi'

DONE (exec make -C /home/jorn/paparazzi -f Makefile.ac AIRCRAFT=Microjet sim  2>&1)

Run '/home/jorn/paparazzi/sw/ground_segment/cockpit/gcs '
Run '/home/jorn/paparazzi/sw/ground_segment/tmtc/server -n'
Run '/home/jorn/paparazzi/sw/simulator/launchsitl -a Microjet -boot -norc'
/home/jorn/paparazzi/var/Microjet/sim/simsitl

** (gcs:2003): CRITICAL **: murrine_style_draw_box: assertion `width >= -1' failed

** (gcs:2003): CRITICAL **: murrine_style_draw_box: assertion `width >= -1' failed

** (gcs:2003): CRITICAL **: murrine_style_draw_box: assertion `width >= -1' failed

** (gcs:2003): CRITICAL **: murrine_style_draw_box: assertion `width >= -1' failed

** (gcs:2003): CRITICAL **: murrine_style_draw_box: assertion `width >= -1' failed

** (gcs:2003): CRITICAL **: murrine_style_draw_box: assertion `width >= -1' failed