[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Paparazzi-devel] GCS Receiving
From: |
Brendan Chen |
Subject: |
RE: [Paparazzi-devel] GCS Receiving |
Date: |
Fri, 26 Sep 2008 10:32:32 +1000 |
Sorry to be so stubborn about this, but somehow i can't open the messages
executable anywhere? I tried the terminal, just won't open, I tried it while
the simulation is running, still won't open. Could you please tell me how and
whether that executable is to be opened and how?
Also do I need to make modification to the messages.ml file to display the data?
Thanks
Brendan
________________________________________
From: address@hidden address@hidden On Behalf Of Roman Krashanitsa
address@hidden
Sent: Friday, 26 September 2008 9:17 AM
To: address@hidden
Subject: Re: [Paparazzi-devel] GCS Receiving
Displaying messages graphically on GCS is tricky and requires changing
.ml files. What you can do for now is display then numerically using
messages.ml. I believe is is compiled as messages. file located in
/sw/ground_segment/tmtc, or just do a search. parameters are in the
file and I think is is messages -c downlink. It will show you all
received messages as a list in the window.
Roman
2008/9/24 Brendan Chen <address@hidden>:
> Basic C I can understand, so it doesnt have anything to do with markup
> languages?
>
> Do I need to make modifications to the .ml type files in the ground_segment
> dir? How do I display my data on the GCS?
>
> Thanks
> Brendan
> ________________________________________
> From: address@hidden address@hidden On Behalf Of Roman Krashanitsa
> address@hidden
> Sent: Thursday, 25 September 2008 10:56 AM
> To: address@hidden
> Subject: Re: [Paparazzi-devel] GCS Receiving
>
> Hey Brendan,
>
> The whole paparazzi system is based on sending numbers through uart
> from the autopilot, receiving them on the ground station again through
> the uart. You may start looking at /conf/messages.xml and
> /sw/autopilot/downlink.h.
>
> The point is, you configure what messages you will have in your system
> by specifying format for each in messages.xml, then write a wrapper
> function for each and put them into downlink.h, and call them either
> automatically at certain periods, or in the code whenever you need to
> transfer something. This task requires knowledge of C though.
>
> Sincerely,
>
> Roman
>
>
>
> 2008/9/24 Brendan Chen <address@hidden>:
>> Hi Guys,
>>
>> I'm trying to send some binary (or preferred decimal) number through the
>> downlink UART. At the other end (the ground station) I would like to collect
>> those data that I sent from the platform and display it somewhere on the
>> GCS, any where is fine.
>>
>> Now my problem is I don't know how to send it, which functions I can use to
>> send it from the platform and how I can collect the packages and display it.
>>
>> Can anyone help me with this problem please?
>>
>>
>> Thanks.
>> Brendan
>>
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel