Re: [Paparazzi-devel] ADC channel for Gyro

[C Kuo]

Hi Michel


  Thanks for the advice, I will order the gyro and do some modification.



Thanks

                                                                   Chen

Quoting Michel GORRAZ <address@hidden>:

> Hi,
> For sure, you can use this ADC with a Gyro (or  other analog sensor) but
> this is a 3.3v max input level, so if your gyro  is a 5v, don't forget the
> resistor bridge...or use  ADC5 or ADC6 : these inputs have their own
> on-board resistor bridge.
> 
> @+
> Michel
> 
> 2008/6/23 C Kuo <address@hidden>:
> 
> >
> > Hi guys
> >
> >
> >  I was wondering, on the "USB" port on TinyV2 has a ADC_7, could I use
> this
> > chaneel for connecting roll gyro?
> >
> >
> >
> >
> >
> > Thanks
> >
> >                                                                 Chen
> >
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
>