RE: [Paparazzi-devel] Paparazzi quickstart

[akochevar]

David,
My guess is that you have a configuration miss match either in your airframe file, or between baud rates in the GCS and airframe.  This is hard to diagnose without doing it in real time.  I suggest you pop into the IRC channel and wait for some help.  Myself 'anton_home' as well as dc3 poine hecto or jeremyt could all lend a hand.  Others probably as well.  With different AP versions out there configuration can be a bit tricky.

AJ

> -------- Original Message --------
> Subject: [Paparazzi-devel] Paparazzi quickstart
> From: David Carr <address@hidden>
> Date: Mon, February 18, 2008 3:21 pm
> To: address@hidden
>
> Is there any sort of cohesive paparazzi quick start (HOWTO) documentation
> available?
>
> I've sucessfully built and loaded the firmware into my Tiny 2.11 board but
> I can't seem to get much further towards a working system.  I've read most
> of the Wiki documentation but I haven't found a real step by step guide. 
> Perhaps I just haven't been looking in the right place.
>
> At this point I've got paparazzi center started and a serial connection to
> my Tiny 2.11.  I'd like to connect to the board and get some status.  I can
> start the telemetry link but I don't see anything that indicates that any
> communication is actually happening.  I'm sorry for the beginner questions
> but I really can't find what I'm looking for in the docs.
>
> Thanks for your help,
> David Carr
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> Paparazzi-devel@nongnu.org
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel