[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Libreboot] wrong coreboot image for X60s
From: |
marcus . moeller |
Subject: |
Re: [Libreboot] wrong coreboot image for X60s |
Date: |
Sun, 25 Jan 2015 11:53:24 +0000 |
Dear Robert.
> > I experienced the same but used x60flashfrom5 afterwards which works. It
> > adds -p internal:boardmismatch=force to the flashrom command.
>
> Thank you for your response. But which Libreboot were you using
> before upgrading to the current one? The doc implies that using
> x60flashfrom5 is not required if you are flashing from a Libreboot
> release which is higher than 5th. I am currently running the 20141015
> release.
I tend to always use the latest and greatest, so this was the case here, too.
Upgraded from previous release.
> > Besides that it's now possible to chainload a grub configuration on your
> > disk:
> > http://libreboot.org/docs/gnulinux/grub_cbfs.html#libreboot_grub_config_ondisk
> >
> > Using this, I was able to avoid rebuilding the image. I have simply done a
> > ln -s /boot/grub/grub.cfg /boot/grub/libreboot_grub.cfg which made me use
> > the original system grub config.
>
> I noticed this, but I don't know yet if I may use this feature, since
> I run Parabola from a fully encrypted HD (included /boot partition).
> But I will look into this, thanks!
Yes, then you still need to build a custom rom.
Greets
Marcus