help-octave
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Cygwin octave-3.3.91-1 test binary available


From: marco atzeri
Subject: Re: Cygwin octave-3.3.91-1 test binary available
Date: Mon, 7 Feb 2011 10:18:00 +0100

2011/2/7 Tatsuro MATSUOKA :
> Hello
>
> Before sending information, I report the results in the PC in the University.
> For the university computer, octave respond and plot via gnuplot goes well 
> but it takes longer time
> than 3.2. But anyway it works.
>
> However,
>
> octave-3.3.91:4> graphics_toolkit fltk
> error: feval: /usr/lib/octave/3.3.91/oct/i686-pc-cygwin/__init_fltk__.oct: 
> failed to load: No such
> file or directory
> e
>

Tatsuro,
not such problem on my computer.
Could you check if the load problem happen also for the other oct files ?

I know that octave is stressing dll loading capability of cygwin, so
it is better to find if it is a real bottleneck
or it is only a glitch of your systems.

> But
>
> $ ls /usr/lib/octave/3.3.91/oct/i686-pc-cygwin/__init_fltk__.oct
> /usr/lib/octave/3.3.91/oct/i686-pc-cygwin/__init_fltk__.oct
>
> /usr/lib/octave/3.3.91/oct/i686-pc-cygwin/__init_fltk__.oct
> exists.
>
> Anyway I wiil make the information for two PCs and send it afterwards.
>
> Please wait a while.

at your convenience ;-)

>
> Regards
>
> Tatsuro
>

Marco


> --- marco atzeri wrote:
>
>> 2011/2/5 Tatsuro MATSUOKA
>> > Hello
>> >
>> >
>> > --- marco atzeri wrote:
>> >> Hi,
>> >> for me peaks produce a nice plot.
>> >> Have you other cygwin octave around ?
>> >>
>> >> what is the output of
>> >>
>> >> $ cygcheck octave
>> [cut]
>> >
>> > Octave-3.2.4 works correct (installed using cygwin setup)
>> >
>> > For octave-3.3.91, on my computer.
>> > I have carried out the cygcheck.  Except for windows dlls, the results 
>> > seem to be the same
>> those shown
>> > by you.
>> >
>> > Regards
>> >
>> > Tatsuro
>> >
>> > $ cygcheck octave
>> [cut]
>> >
>> >
>>
>> Tatsuro,
>> I just installed the package at my home computer and it is fine.
>> Also without X, peaks produce a ASCI plot.
>> So I guess something on you system interferes with the correct dll
>> loading/operation
>>
>> could you send me privately as attachment the outcome of
>>
>> cygcheck -s -v -r > cygcheck.out
>>
>> Regards
>> Marco
>> marco (dot) atzeri (at) gmail (dot) com
>>
>


reply via email to

[Prev in Thread] Current Thread [Next in Thread]