[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Using grub on fuloong 6004

From: Vladimir 'φ-coder/phcoder' Serbinenko
Subject: Re: Using grub on fuloong 6004
Date: Sat, 23 Jul 2011 18:22:13 +0200
User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv: Gecko/20110626 Iceowl/1.0b2 Icedove/3.1.11

On 23.07.2011 15:11, David Kuehling wrote:
>>>>>> "Vladimir" == Vladimir 'φ-coder/phcoder' Serbinenko <address@hidden> 
>>>>>> writes:
>>> sudo grub-mkimage --config=/boot/grub.elf.conf \
>>> --output=/boot/grub3.elf --format=mipsel-fuloong-elf --verbose \ ata
>>> part_msdos ext2 reboot halt lspci ohci usbtest usbms linux \ fat xfs
>>> part_gpt multiboot2 minicmd configfile gcry_md5 hashsum
>> ata was renamed to pata.
> Just recreated my grub.elf with ata in the grub.elf.conf replaced by
> pata, plus 'pata' module added to the grub-mkimage command line.
> Now the grub blanks the screen and hangs when loaded from pmon.
I've fixed 2 regressions in trunk.
> Maybe I should add that I'm using a 750GB hard-disk with 4k sectors in
> my Fuloong.  Could that be a problem?  It's neigher a problem for pmon
> nor for linux, though.
I'm attaching a patch which should add the support for 4K sectors with ATA.
> cheers,
> David
> _______________________________________________
> Grub-devel mailing list
> address@hidden

Vladimir 'φ-coder/phcoder' Serbinenko

Attachment: 4Kata.diff
Description: Text Data

Attachment: signature.asc
Description: OpenPGP digital signature

reply via email to

[Prev in Thread] Current Thread [Next in Thread]