[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


From: Kai Harrekilde-Petersen
Subject: Re: SOS
Date: Wed, 29 Jan 2020 14:11:40 +0100
User-agent: Android


You should post this to the mailing list.

Best regards Kai

From: Logan Qualls
Sent: Tue Jan 28 00:27:21 GMT+01:00 2020
To: Kai Harrekilde-Petersen
Subject: Re: SOS


This is a step-by-step thing I did yesterday. Does this help identify the problem?

On Jan 27, 2020, at 3:58 PM, Kai Harrekilde-Petersen <address@hidden> wrote:

You can enable the UART through raspi-config or edit /boot/config.txt to include the line "enable_uart=1"

On 27 Jan 2020 21.46, Dominic Amann wrote:
You may find that you haven't enabled the serial port on the Pi. There is (or used to be) a switch in the device tree (perhaps toggled by raspi-config or some such - my memory fails me here).

On Sun, 26 Jan 2020 at 01:24, Logan Qualls <address@hidden> wrote:

My name is Logan. I am new here— at everything. I have no prior coding experience, I have just recently received my Raspberry Pi 4.

I’m having trouble setting up my Adafruit Ultimate GPS with gpsd. I’ve tried so many things I’ve lost track. I’m unsure of what data to provide or even how to express the situation. Is there anyone who could point me to something/someone that can help me identify where the issue is occurring? I have looked through the troubleshooting page on the gpsd website, but I haven’t had much luck.

You are my last hope.


Dominic Amann
M 416-270-4587

reply via email to

[Prev in Thread] Current Thread [Next in Thread]