[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 2400 Baud

From: Pawel Kot
Subject: Re: 2400 Baud
Date: Fri, 9 Oct 2009 20:05:49 +0200


On Tue, Oct 6, 2009 at 18:09, Chris Bartram
<address@hidden> wrote:
> I'm using port=/dev/ttyUSB0, (which I've tested with the terminal
> session), and model= at, and set the serial_baudrate = 2400, as that is
> what the modem seems to need according to the documentation.
> When I send I get "Serial port speed 2400 not supported!".
> Is there a way around this? Is this even a good idea, and should I
> devote some time to a writing a script to drive the modem directly (I'm
> not much of a programmer)?

I pushed changes allowing to set 2400 and 4800 baud on serial port.
Please try out current git version.

take care,
Pawel Kot

reply via email to

[Prev in Thread] Current Thread [Next in Thread]