[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 6150 through infrared

From: Szabo, Tamas
Subject: RE: 6150 through infrared
Date: Fri, 30 Aug 2002 08:24:34 +0100


I read the howto (again) but I did not find any new information.

I use /dev/ttyS0 with settings: uart 8250 port 0x3f8 irq 4, and of curse I
do not use IrDA drivers when I try to connect with gnokii. My .gnokiirc is
set up based on howto. There is another notebook (a Portocom) which is able
to work with my phone, and installed and set up by me.

The main question: is it possible that my _hardware_ can not usable in SIR
mode? (basically, as I mentioned, it can send bytes over IR port (without
IrDA modules (nsc-ircc, ircomm, ircomm-tty, etc))).

In the bios I can set FIR only. But AFAIK the nsc chip is able to work in
SIR mode - and with minicom I can send bytes over IR using the linux serial
driver (I think in this case I use SIR mode), but at 115200 (and higher
speeds) some garbage appears in minicom.


Problems with Windows - Reboot.
Problems with Linux       - Be root.

> -----Original Message-----
> From: Pawel Kot [SMTP:address@hidden
> Sent: Thursday, August 29, 2002 22:15
> To:   address@hidden
> Subject:      Re: 6150 through infrared
> On Thu, 29 Aug 2002, Szabo, Tamas wrote:
> > I would like to use my 6150 with IR. But it seems that my laptop a bit
> buggy
> > at 115200 (maybe the echo cancelling is not work correctly because at
> 115200
> > I see some characters when I typing (not same characters which I type,
> some
> > kind of garbage) but those not appears at 57600 or below). As I realised
> the
> > initialisation use 9600 bps and it seems to be ok. But when try to
> switch
> > 115200 the communication fails.
> >
> > Is it possible to use infrared at lower speed (57600 or less)?
> >
> > My other trouble that my computer only can use IR port in SIR mod after
> wake
> > up from standby (It is a VAIO PCG-N505X, with NSC 87338 compatible
> driver,
> > for IrDA I use nsc-ircc module). In IrDA mode it works correctly (with
> > irdadump I see the reply from phone (Nokia 6100...)). Has anybody
> experience
> > with similar problem?
> Docs/gnokii-ir-howto
> pkot
> -- 
> mailto:address@hidden :: mailto:address@hidden
> :: Kernel Traffic po polsku
> _______________________________________________
> gnokii-users mailing list
> address@hidden

The information contained in this message or any of its attachments may be 
confidential and is intended for the exclusive use of the addressee(s). Any 
disclosure, reproduction, distribution or other dissemination or use of this 
communication is strictly prohibited without the express permission of the 
sender. The views expressed in this email are those of the individual and not 
necessarily those of Sony or Sony affiliated companies. Sony email is for 
business use only. 

This email and any response may be monitored by Sony United Kingdom Limited.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]