gm2
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Embedded aarch64?


From: Robert Roland
Subject: Re: Embedded aarch64?
Date: Wed, 4 Aug 2021 00:11:54 +0000

(side note: Gaius, I accidentally replied directly to you instead of the list on my first try, sorry for the duplicate!)

Ahhh, so you do it directly from an AArch64 machine.

I was trying to create a cross-compiler on my x86-64 machine, with the target being bare metal.

I'll have to set up a Raspberry Pi as a remote development machine but that, but not difficult at all.

Thanks,

Robert

From: Gaius Mulley <mulley.gaius@gmail.com>
Sent: Tuesday, August 3, 2021 1:26 AM
To: Robert Roland <rob.roland@outlook.com>
Cc: gm2@nongnu.org <gm2@nongnu.org>
Subject: Re: Embedded aarch64?
 
Hi Robert,

yes I build gm2 on a linaro alip aaarch64 based machine (running debian stretch).  I think I'd try gcc-11 first

regards,
Gaius


On Tue, Aug 3, 2021 at 2:59 AM Robert Roland <rob.roland@outlook.com> wrote:
Is it possible to build gm2 for an AArch64 embedded host? I have the aarch64-elf toolchain from Linaro installed.

I haven't had much luck - I was wanting to experiment with m2min, but it seems to need a working C++ compiler.

Thanks,

Robert

reply via email to

[Prev in Thread] Current Thread [Next in Thread]