[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: GRC 3.8 Output language Py2 or Py3 (Windows)
From: |
CEL |
Subject: |
Re: GRC 3.8 Output language Py2 or Py3 (Windows) |
Date: |
Thu, 20 Feb 2020 15:24:49 +0000 |
Ha! Don't get me wrong, it's awesome you're using Windows.
Now, I don't think Geof came around to building a Python3 GNU Radio, so
you're out of luck for now. You could try your hands on doing that
yourself – follow the link to the Github repo with the source building
scripts – but I'd doubt it's easy :(
Alternatively:
Use WSL to run GNU Radio 3.8 on Ubuntu 19.04 or 19.10[1] under windows,
then install GNU Radio 3.8 [2]. Install an X server for windows.
I've had a student that did that and used VS Code on windows to target
his WSL installation, it worked well.
Or, really, just install a modern Linux (eg. Ubuntu 19.10, Debian)
natively or in a VM for now :)
As of now, there IS concentrated efforts to improve the windows
situation, but to be honest, it's a strange and confusing and
frustrating world for a lot of us, and I don't even have a single
Windows machine...
Best regards,
Marcus
[1] https://wiki.ubuntu.com/WSL#Ubuntu_on_WSL
[2] https://launchpad.net/~gnuradio/+archive/ubuntu/gnuradio-releases
On Thu, 2020-02-20 at 15:17 +0000, Jerom Maas - LR wrote:
> Hello Marcus,
>
> that is correct! Sometimes, looking at the help on these forums, I also have
> the feeling that I'm one of the few windows users.
> First of all, a correction: I did not use any .exe, but the file:
> gnuradio_3.8.0.0_win64.msi
>
> I got it from http://www.gcndevelopment.com/gnuradio/downloads.htm,
> downloaded yesterday (feb 19th).
> The file can be found under the 64-Bit Any CPU Windows installer, top link -
> v3.8.0.0/v1.7 BETA
>
> Thank you very much for the help. It's frustrating to be using windows and to
> differ from the linux standards, but looking at the bright side:
> I'm glad to help fixing the last problems for windows users :).
>
> Jerom
> Van: Müller, Marcus (CEL) <address@hidden>
> Verzonden: donderdag 20 februari 2020 16:11:15
> Aan: address@hidden; Jerom Maas - LR
> CC: address@hidden
> Onderwerp: Re: GRC 3.8 Output language Py2 or Py3 (Windows)
>
> AAAAH you're one of the few windows users; we'll need you to tell us
> *exactly* what you've downloaded!
>
> Best regards,
> Marcus
>
> On Thu, 2020-02-20 at 15:08 +0000, Jerom Maas - LR wrote:
> > Hello Michael, thanks for the quick response!
> > I've just reinstalled GRC, but I've not seen a single option about Py2 or
> > Py3. Maybe it's because I use the .exe installer, that it automatically
> > chooses Py2 then? As said before, I don't even have Py2 installed on my pc.
> > Should I give it a go using Powershell, or try another method?
> >
> > Jerom
> > Van: Michael Dickens <address@hidden>
> > Verzonden: donderdag 20 februari 2020 15:50:43
> > Aan: Jerom Maas - LR
> > CC: address@hidden
> > Onderwerp: Re: GRC 3.8 Output language Py2 or Py3 (Windows)
> >
> > Hi Jerom - I believe GRC outputs Py script based on how GR is installed.
> > Since GR38 can be installed using Py27 or Py3, if it's installed using Py27
> > then GRC will output for Py27. If installed for Py3 then it'll output for
> > Py3. Pretty sure this is correct. Hence, I'd advise you to check how GR is
> > installed in the first place & if for Py27 then see about getting it
> > installed for Py3. Hope this is useful! - MLD
> >
> > On Thu, Feb 20, 2020 at 9:06 AM Jerom Maas - LR <address@hidden> wrote:
> > > Hello all,
> > >
> > > after installing GRC 3.8, I find that the .py files that are created from
> > > grc are python 2, instead of python 3.
> > > I use Py3 and not Py2, so that's a problem.
> > > How do I change the output language of GRC? If I use the 'option block'
> > > I can only choose 'Python' or ' C++' , but I can't specify the version
> > > of Python. I am using Windows.
> > >
> > > Thanks for your help,
> > >
> > > Jerom Maas
> > >
> > > PS I am not so familiar with C, so if the solution is to alter a bit in
> > > Cmake or something, can you specifically name the file that needs to be
> > > changed? That would be very helpful!
> > >
> > >
> > >
> >
> >
smime.p7s
Description: S/MIME cryptographic signature