[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for
From: |
CEL |
Subject: |
Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio. |
Date: |
Mon, 15 Jul 2019 15:48:03 +0000 |
Dear Atiqur,
my concerns are less of the GRC variant, but of the DSP variant:
* If your GRC doesn't complain about you using Throttle together with
the hardware blocks, that's a bug in the hardware blocks. Anyway, NEVER
use Throttle with hardware blocks. You incur the two-clock problem, and
will run into overflows/underruns. You can't see that with a GNU Radio-
internal visualization. More info under [1].
* Your sampling rate is laughably low for SDR applications, which is
why I presume that the LimeSDR doesn't support sampling rates that are
so low.
* No matter what you say, an equalizer and a timing/phase recovery is
something to be done on the *receive* side, not on the transmit side.
Best regards,
Marcus
[1]
https://wiki.gnuradio.org/index.php/FAQ#When_do_I_use_a_throttle_block.3F
On Mon, 2019-07-15 at 17:40 +0200, Md. Atiqur Rahman wrote:
> Dear Marcus,
> Thank you for your quick reply.
>
> Actually, I am very much new in GRC. The GRC is running without giving me any
> error though. If I use 32KS/s, it stopped working by saying python stop
> working. Therefore, I am giving 64KS/s.
>
> I am following the grc-tutorial, hence that modulation scheme contains
> equalizer and timing recovery on the transmit side. Shouldn't I use it?
> please correct me if I am wrong.
>
> Sincerely,
> Atiqur
>
> On Mon, Jul 15, 2019 at 5:05 PM Müller, Marcus (CEL) <address@hidden> wrote:
> > Oh, and why are you doing an equalizer and a timing recovery on the
> > *transmit* side!?
> >
> > On Mon, 2019-07-15 at 15:04 +0000, Müller, Marcus (CEL) wrote:
> > > Also, without knowing, I'm almost certain that 64kS/s is not a possible
> > > sampling rate for the device. You really might want to read the console
> > > output very closely!
> > > On Mon, 2019-07-15 at 14:56 +0000, Müller, Marcus (CEL) wrote:
> > > > So, first of all:
> > > >
> > > > never use "Throttle" in a flow graph with hardware.
> > > > In fact, GRC will *scream* at you that you shouldn't be doing that!
> > > >
> > > > Then: I can't claim to have any knowledge of the limeSDR driver, but
> > > > unless that driver specifically allows you to start the TX and RX
> > > > streaming at the exact same instance: That delay is not a deterministic
> > > > value.
> > > >
> > > > Best regards,
> > > > Marcus
> > > >
> > > > On Mon, 2019-07-15 at 16:46 +0200, Md. Atiqur Rahman wrote:
> > > > > Hello Guys, I am having trouble to find the proper delay point
> > > > > between Rx and Tx signal while running the qpsk modulation scheme on
> > > > > gnu radio to my Limesdr mini board. While I am running the program
> > > > > through limesdr, I realize that it has a greater delay between (as
> > > > > expected). However, until now I am unable to find the proper amount
> > > > > of delay. I am changing the range of the delay from gui range(int
> > > > > type) to find the delay which will give me the synchronized Rx and Tx
> > > > > so that I could ensure that there is no missing data at the receiver
> > > > > side.
> > > > >
> > > > > I attach the file here in this email. Hope anybody would like to
> > > > > help. Thanks in advance.
> > > > >
> > > > > Sincerely,
> > > > > Atiqur
> > > > >
> > > > > _______________________________________________
> > > > > Discuss-gnuradio mailing list
> > > > > address@hidden
> > > > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> > > >
> > > > _______________________________________________
> > > > Discuss-gnuradio mailing list
> > > > address@hidden
> > > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> > >
> > > _______________________________________________
> > > Discuss-gnuradio mailing list
> > > address@hidden
> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
smime.p7s
Description: S/MIME cryptographic signature
- [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., Md. Atiqur Rahman, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., CEL, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., CEL, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., CEL, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., Md. Atiqur Rahman, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., Md. Atiqur Rahman, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio.,
CEL <=
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., Md. Atiqur Rahman, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., CEL, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., Kyeong Su Shin, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., Md. Atiqur Rahman, 2019/07/16
- [Discuss-gnuradio] Let's wrap this up! (was: Re: Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio.), CEL, 2019/07/16
- Re: [Discuss-gnuradio] Let's wrap this up! (was: Re: Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio.), Md. Atiqur Rahman, 2019/07/16