[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for
From: |
CEL |
Subject: |
Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio. |
Date: |
Mon, 15 Jul 2019 15:04:10 +0000 |
Also, without knowing, I'm almost certain that 64kS/s is not a possible
sampling rate for the device. You really might want to read the console
output very closely!
On Mon, 2019-07-15 at 14:56 +0000, Müller, Marcus (CEL) wrote:
> So, first of all:
>
> never use "Throttle" in a flow graph with hardware.
> In fact, GRC will *scream* at you that you shouldn't be doing that!
>
> Then: I can't claim to have any knowledge of the limeSDR driver, but
> unless that driver specifically allows you to start the TX and RX
> streaming at the exact same instance: That delay is not a deterministic
> value.
>
> Best regards,
> Marcus
>
> On Mon, 2019-07-15 at 16:46 +0200, Md. Atiqur Rahman wrote:
> > Hello Guys, I am having trouble to find the proper delay point between Rx
> > and Tx signal while running the qpsk modulation scheme on gnu radio to my
> > Limesdr mini board. While I am running the program through limesdr, I
> > realize that it has a greater delay between (as expected). However, until
> > now I am unable to find the proper amount of delay. I am changing the range
> > of the delay from gui range(int type) to find the delay which will give me
> > the synchronized Rx and Tx so that I could ensure that there is no missing
> > data at the receiver side.
> >
> > I attach the file here in this email. Hope anybody would like to help.
> > Thanks in advance.
> >
> > Sincerely,
> > Atiqur
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
smime.p7s
Description: S/MIME cryptographic signature
- [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., Md. Atiqur Rahman, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., CEL, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio.,
CEL <=
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., CEL, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., Md. Atiqur Rahman, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., Md. Atiqur Rahman, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., CEL, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., Md. Atiqur Rahman, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., CEL, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., Kyeong Su Shin, 2019/07/15
- Re: [Discuss-gnuradio] Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio., Md. Atiqur Rahman, 2019/07/16
- [Discuss-gnuradio] Let's wrap this up! (was: Re: Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio.), CEL, 2019/07/16
- Re: [Discuss-gnuradio] Let's wrap this up! (was: Re: Delay determination between Tx and Rx signal for limesdr mini with help of gnu radio.), Md. Atiqur Rahman, 2019/07/16