[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] [GSoC2019]: First report from Bowen

From: Bowen Hu
Subject: Re: [Discuss-gnuradio] [GSoC2019]: First report from Bowen
Date: Tue, 14 May 2019 05:42:16 +0000

Hi Johannes,

Thank you for your advice. The source code of GNU Radio in GitHub repository is definitely a great reference, I have fork and clone it.

As I discussed with my mentor, Marcus, for OOT module which I am going to work on, the stable version acquired through distros would be enough.

I might port the code to a newer version later.

Best regards,

From: Johannes Demel <address@hidden>
Sent: Mon, 13 May 2019
To: Bowen Hu
Subject: Re: [Discuss-gnuradio] [GSoC2019]: First report from Bowen
Hi Bowen,
it's great that you start to work on your project right away. Since you
want to implement a new feature for GNU Radio, I'd suggest to use the
latest GNU Radio version which is the one in the repository. To rephrase
it, I recommend to use GNU Radio 3.8. Though, I assume you already
discussed this with your mentors or will do so.
Therefore I suggest to use a source build/install instead of the version
provided by your distribution.
Am 12.05.19 um 18:18 schrieb Bowen Hu:
> Hi all,
> I am happy to be accepted by GSoC 2019 working on cycle-accurate
> simulation of Verilog. Here
> <https://b0wen-hu.github.io/2019/05/12/First-report/>
> (https://b0wen-hu.github.io/2019/05/12/First-report/)
> is my first report.
> ## Progress this week
> I have set up the working environment and read some tutorials for GNU
> Radio development in the last few days.
> My current working environment is Ubuntu 18.04 LTS installed GNU Radio
> version 3.7.11 by apt, but I am considering switch to newest Ubuntu
> 19.04 which shipped with GNU Radio version 3.7.13 by apt.
> I am following the tutorial and created my first module gr-howto (This
> may not be a good name, so I will change the module name in the coming
> week). I will continue to read tutorials, hopefully I could finish them
> (from chapter 2 to chapter 7) in the next week.
> I also managed to run the simulation of a simple Verilog module with
> Verilator, it works as anticipated, you can find it here. This is just a
> standalone simulation program, in order to let the GNU Radio work with
> the Verilator-generated file, there are much work to do.
> ## Plan next week
> Finish all the tutorials from chapter 2 to chapter 7.
> Try to make the Verilator related header file available in GNU Radio
> blocks. A source block like this (flicker.v) would be a good start.
> ## Issue(s)
> The module name gr-howto need to be changed.
> Best regards,
> Bowen
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

reply via email to

[Prev in Thread] Current Thread [Next in Thread]