[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] [GSoC2019]: First report from Bowen

From: Johannes Demel
Subject: Re: [Discuss-gnuradio] [GSoC2019]: First report from Bowen
Date: Mon, 13 May 2019 08:28:32 +0000

Hi Bowen,

it's great that you start to work on your project right away. Since you 
want to implement a new feature for GNU Radio, I'd suggest to use the 
latest GNU Radio version which is the one in the repository. To rephrase 
it, I recommend to use GNU Radio 3.8. Though, I assume you already 
discussed this with your mentors or will do so.
Therefore I suggest to use a source build/install instead of the version 
provided by your distribution.


Am 12.05.19 um 18:18 schrieb Bowen Hu:
> Hi all,
> I am happy to be accepted by GSoC 2019 working on cycle-accurate 
> simulation of Verilog. Here 
> <https://b0wen-hu.github.io/2019/05/12/First-report/
> (https://b0wen-hu.github.io/2019/05/12/First-report/) 
> is my first report.
> ## Progress this week
> I have set up the working environment and read some tutorials for GNU 
> Radio development in the last few days.
> My current working environment is Ubuntu 18.04 LTS installed GNU Radio 
> version 3.7.11 by apt, but I am considering switch to newest Ubuntu 
> 19.04 which shipped with GNU Radio version 3.7.13 by apt.
> I am following the tutorial and created my first module gr-howto (This 
> may not be a good name, so I will change the module name in the coming 
> week). I will continue to read tutorials, hopefully I could finish them 
> (from chapter 2 to chapter 7) in the next week.
> I also managed to run the simulation of a simple Verilog module with 
> Verilator, it works as anticipated, you can find it here. This is just a 
> standalone simulation program, in order to let the GNU Radio work with 
> the Verilator-generated file, there are much work to do.
> ## Plan next week
> Finish all the tutorials from chapter 2 to chapter 7.
> Try to make the Verilator related header file available in GNU Radio 
> blocks. A source block like this (flicker.v) would be a good start.
> ## Issue(s)
> The module name gr-howto need to be changed.
> Best regards,
> Bowen
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

reply via email to

[Prev in Thread] Current Thread [Next in Thread]