Re: [Discuss-gnuradio] Re g : Building gr-uhd and usrp2-firmware

[sumitstop]

Hi Marcus.... I have used your script.Its superb! I just wanted to build step
by step :)
Btw I just got all things build properly.Actually I put mb-gcc in the home
folder and set the path variables accordingly.And it worked :) 

Marcus D. Leech wrote:
> 
> On 06/23/2011 06:50 PM, sumitstop wrote:
>> I am using ubuntu Lucid 10.04 LTS.
>>
>> Did the following thing
>>
>> Step-1 Installed all the dependencies for ubuntu Lucid 10.04 from the
>> script
>> given here
>> http://gnuradio.org/redmine/projects/gnuradio/wiki/UbuntuInstall
>>
>> step-2 git clone http://gnuradio.org/git/gnuradio.git
>> then
>>
>> step-3 git clone http://github.com/EttusResearch/UHD-Mirror.git
>> after that
>>
>> step-4 cd gnuradio
>> step-5 ./bootstrap
>> step-6 ./configure
>>
>> I got following messages
>> *********************************************************************
>> The following components were skipped either because you asked not
>> to build them or they didn't pass configuration checks:
>>
>> usrp2-firmware
>>
>> These components will not be built.
>>
>>
>> *********************************************************************
>> The following GNU Radio components have been successfully configured:
>>
>> config
>> gruel
>> volk
>> gnuradio-core
>> usrp
>> usrp2
>> gr-usrp
>> gr-usrp2
>> gr-msdd6000
>> gr-audio
>> gr-atsc
>> gr-cvsd-vocoder
>> gr-gpio
>> gr-gsm-fr-vocoder
>> gr-noaa
>> gr-pager
>> gr-radar-mono
>> gr-radio-astronomy
>> gr-trellis
>> gr-video-sdl
>> gr-wxgui
>> gr-qtgui
>> gr-sounder
>> gr-utils
>> gnuradio-examples
>> grc
>> docs
>>
>> You my now run the make command to build these components.
>>
>> *********************************************************************
>> The following components were skipped either because you asked not
>> to build them or they didn't pass configuration checks:
>>
>> gcell
>> gr-gcell
>> gr-comedi
>> gr-uhd
>>
>> These components will not be built.
>>
>> Configured GNU Radio release v3.4.0-2-g081497e7 for build.
>>
>> **********************************************************************
>>
>> I searched a lot and found answer to many of questions
>>
>> > From the following link(in the summary) i found that no need to build
>> gr-comedi
>> http://lists.gnu.org/archive/html/discuss-gnuradio/2006-06/msg00225.html
>>
>> Also in the following link I read that gcell and gr-gcell are needed only
>> for IBM cell processor.
>> http://www.ruby-forum.com/topic/201112
>>
>> So I want to ask what should I do to build
>>
>> gr-uhd and usrp2-firmware
>>
>> I also did
>>
>> ./configure --enable-gr-uhd
>>
>> but it shows following message
>>
>> checking for UHD... no
>> gr-uhd requires libuhd 3.x.x
>> configure: error: Component gr-uhd has errors; stopping.
>>
>> I also did
>>
>> ./configure --enable-usrp2-firmware
>>
>> and got following message
>>
>> checking whether byte ordering is bigendian... no
>> checking for mb-gcc... no
>> usrp2 firmware requires mb-gcc.  Not found
>> configure: error: Component usrp2-firmware has errors; stopping.
>> configure: error: ./configure.gnu failed for usrp2/firmware
>>
>> I saw several posts with the same problem but honestly I couldn't
>> understand
>> what to do next.
>>
>> Regards
>>
>>
>>
>>
>> -----
>> Sumit Kr.
>> Research Assistant
>> Communication Research center
>> IIIT Hyderabad
>> India
> I'll once again do some personal horn-tooting, if y'all can stand it:
> 
> http://www.sbrac.org/files/build-gnuradio
> 
> 
> It takes care of downloading/building UHD+Gnu Radio, including 
> downloading the latest firmware, installing pre-requisites, and
> uninstalling
>    any installed-from-binary-packages "stuff" that might interfere with 
> a "built from source" build of Gnu Radio.
> 
> It works for Ubuntu and Fedora recent releases.
> 
> It's a shell script.  It takes quite a while to run, and generally 
> operates as silently as is practical.
> 
> 
> 
> -- 
> Marcus Leech
> Principal Investigator
> Shirleys Bay Radio Astronomy Consortium
> http://www.sbrac.org
> 
> 
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> 
> 


-----
Sumit Kr.
Research Assistant
Communication Research center
IIIT Hyderabad
India
-- 
View this message in context: 
http://old.nabble.com/Reg-%3A-Building-gr-uhd-and-usrp2-firmware-tp31915462p31917569.html
Sent from the GnuRadio mailing list archive at Nabble.com.